Dimensional Measuring Interface
Standard
Standard Improvement Request
|
SIR No. 97-66 DMIS Release 3.0 SIR Type Error Severity Documentation Deficiency Status Resolved Date Submitted August 15 1997 Date Validated August 15 1997 Date In Process Date Referred April 1 1998 Date Vote Pending Date Closed August 20 1998 Action Clarifications Submitted By Thomas Kramer NIST Room B-124, Bldg. 220 Gaithersburg MD 20899 USA Phone: (301)975-3518 Fax: (301)990-9688 kramer@cme.nist.gov |
Problem Topic
CONST: Figures labeled incorrect
Problem Description
Pages 254 - 268
The figures for CONST are messed up.
The Figures on pages 254 and 262-263 are both labeled Figure 9.1. All three subparts on page 263 are labeled 91E. The RCTNGL 91E should be 91F (as referenced on page 249). I could not find a reference to the sphere 91E, but presumably there should be a reference, and it should be to 91G.
I could not find any references to the figures on pages 254 and 255. They look relevant to CONST/POINT.
The figures on pages 255 and 264 are both labeled Figure 9.2.
References
None
Related SIRs
None
Suggested Resolution
Straighten out the figure numbering, and be sure all figures are referenced.
[This SIR has been referred to the DMIS document custodian, Ron Webber, for correction.]
Support Documentation
None
Resolution
Warning!!
The following statement is only a resolution to a Standard Improvement Request (SIR) and is NOT part of the current DMIS standard, nor is it guaranteed to become part of the next revision of the DMIS standard even if voted and accepted by the DMIS National Standards Committee. This resolution is tentative because it may not be incorporated into the next version of the standard, it could be changed prior to the next release, or it could be changed as the result of the "public review and comment" period required for the next version of the standard. If you choose to use this tentative resolution, you do so at your own risk since at this time it is not part of the DMIS standard.
All figures will be updated and corrected in a future release of the specification.
Attachments
None
Notes
Added by Mike Holloway, hkm@ornl.gov on 7/31/1998
There is no reference to this SIR in any meeting minutes.
Added by DNSC, rui@ornl.gov on 8/6/1998
All figures will be updated and corrected in a future release of the specification.