Sponsored by Consortium for Advanced Manufacturing, Inc.

Dimensional Measuring Interface Standard
Standard Improvement Requests


  • Submit SIR
  • Standards Home
  • CAM-I Home

    • DMIS Standard Improvement Requests
    The official SIR Reference Log for all submitted SIRs is given below. Not all SIRs have been resolved; however, whatever information is available concerning the status of all SIRs and their final resolutions will be posted at this location.

    To submit an SIR, first fill out the Standard Improvement Request form.

    The text for each SIR may be accessed by selecting its SIR number in the table below. Be sure to take advantage of the extensive search capabilities which can provide you information on other SIRs related to the topic of your concern, to find SIRs that deal with a given topic, or to locate specific SIRs by submitter (contact), company, problem type, etc.

    Currently showing 597 SIRs

    Note: You can sort the following table on any column by clicking on the column heading.

    SIR No. Submit Date Submitted By Company Problem Type Topic Status Status Date
    96-1 May 20 1996 Pete Kocher SILMA Other FEDRAT: Use of ",n" not clear Resolved May 17 2005
    96-2 November 3 1996 Richard B. Riker Software Quality Affair Consulting, Inc. Enhancement QIS: Statment Outputs Resolved September 30 1997
    96-3 November 3 1996 Richard B. Riker Software Quality Affair Consulting, Inc. Enhancement Sect.2.7: Remove 256 Character limit Resolved April 30 1997
    96-4 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement DMESW: Wait Period Resolved April 30 1997
    96-5 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement Cross c/l cyl. coord. sys. Resolved August 21 1998
    96-6 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement OUTPUT: Decimal places on output Resolved August 21 1998
    96-7 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement TOL/DIAM: Min/max value Resolved August 21 1998
    96-8 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement TOL/DISTB: Min/max value Resolved August 24 1998
    96-9 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement TOL: Tolerance eval. algorithm Resolved August 19 1998
    96-10 November 11 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement CONST/POINT: Obtain extreme points Resolved August 21 1998
    96-11 November 4 1996 Scott Underwood Lockheed Martin Energy Systems Enhancement Soft Funct. Gaging Resolved August 24 1998
    97-1 March 6 1997 Dietmar May Object Workshops, Inc. Other COMMON: Interpretation Resolved April 16 1997
    97-2 March 6 1997 Dietmar May Object Workshops, Inc. Other SENSOR: Interpretation of application Resolved August 20 1998
    97-3 June 3 1998 Dietmar May Object Workshops, Inc. Other ACLRAT: Implicit DME default?? Resolved April 11 1997
    97-4 March 6 1997 Dietmar May Object Workshops, Inc. Other FEDRAT: Default value ?? Resolved April 11 1997
    97-5 March 6 1997 Dietmar May Object Workshops, Inc. Other DISPLY: Interpretation Resolved September 11 1997
    97-6 March 6 1997 Dietmar May Object Workshops, Inc. Other DECL: Syntax ?? Resolved September 11 1997
    97-7 March 6 1997 Dietmar May Object Workshops, Inc. Other RAPID: Application of? Resolved April 11 1997
    97-8 March 6 1997 Dietmar May Object Workshops, Inc. Other VALUE: OUTOL for Composite Tolerances Resolved April 11 1997
    97-9 March 6 1997 Dietmar May Object Workshops, Inc. Other TOL/DISTB: Redundant Resolved April 11 1997
    97-10 March 6 1997 Dietmar May Object Workshops, Inc. Other SNSET: Allow mult. simul. sens. algs? Resolved August 20 1998
    97-11 March 6 1997 Dietmar May Object Workshops, Inc. Other MEAS: Diff from F() type? Resolved April 11 1997
    97-12 March 6 1997 Dietmar May Object Workshops, Inc. Other CLOSE/DID: What is default?? Resolved August 24 1998
    97-13 March 6 1997 Dietmar May Object Workshops, Inc. Other PTBUFF: Carriage specific? Resolved April 11 1997
    97-14 March 6 1997 Dietmar May Object Workshops, Inc. Other DMISMD: Scoping of valid statements Resolved September 11 1997
    97-15 March 6 1997 Dietmar May Object Workshops, Inc. Other FEAT/PTDATA: Coor'd type for point output Resolved August 20 1998
    97-16 March 6 1997 Dietmar May Object Workshops, Inc. Other CHR: Return type of CHR( ) Resolved September 11 1997
    97-17 March 6 1997 Dietmar May Object Workshops, Inc. Other ACLRAT,FEDRAT: Validity of RPMM,MPMM Resolved April 11 1997
    97-18 March 6 1997 Dietmar May Object Workshops, Inc. Other Are all variables declared? Resolved September 11 1997
    97-19 March 6 1997 Dietmar May Object Workshops, Inc. Other (label): Can it be a INTGR or REAL Resolved July 7 1998
    97-20 March 6 1997 Dietmar May Object Workshops, Inc. Other SNSDEF/LASER: Missing arguments for POL Resolved September 11 1997
    97-21 March 6 1997 Dietmar May Object Workshops, Inc. Other READ: From a printer is permitted? Resolved September 11 1997
    97-22 March 6 1997 Dietmar May Object Workshops, Inc. Other SENSOR/PROPE: Only sensor with a SA? Resolved July 22 1999
    97-23 March 6 1997 Dietmar May Object Workshops, Inc. Other EVAL/FA(label): As it applies to tolerance Resolved September 11 1997
    97-24 March 6 1997 Dietmar May Object Workshops, Inc. Other ELEMNT: Use of char? Resolved August 20 1998
    97-25 March 6 1997 Dietmar May Object Workshops, Inc. Other GOTARG: Statements allowed in block? Resolved April 11 1997
    97-26 March 6 1997 Dietmar May Object Workshops, Inc. Other POL: Scoping of coordinates? Resolved August 20 1998
    97-27 March 6 1997 Dietmar May Object Workshops, Inc. Other CRGDEF: Use of LITDEF,FILDEF,WINDEF? Resolved August 20 1998
    97-28 March 6 1997 Dietmar May Object Workshops, Inc. Other MACRO: Scoping of label, arguments? Resolved April 11 1997
    97-29 March 6 1997 Dietmar May Object Workshops, Inc. Other SNSET: Trailing specification? Resolved August 20 1998
    97-30 March 6 1997 Dietmar May Object Workshops, Inc. Other LITDEF: as applied to mulitple SNSLCT Resolved August 20 1998
    97-31 March 6 1997 Dietmar May Object Workshops, Inc. Other OUTPUT: When does it occur for xxx? Resolved August 20 1998
    97-32 March 6 1997 Dietmar May Object Workshops, Inc. Other RMEAS: What is diff of n vs. n1? Resolved August 20 1998
    97-33 March 6 1997 Dietmar May Object Workshops, Inc. Other RMEAS: Clarification in format 1 Resolved April 11 1997
    97-34 March 6 1997 Dietmar May Object Workshops, Inc. Other PROCID: Note clarification. Resolved April 11 1997
    97-35 March 6 1997 Dietmar May Object Workshops, Inc. Other SENS/PROBE: Clarification on use of ti,tj,tk" Resolved August 20 1998
    97-36 March 6 1997 Dietmar May Object Workshops, Inc. Other TOL/ANGL,COMPOS: Missing commas Resolved April 11 1997
    97-37 March 6 1997 Dietmar May Object Workshops, Inc. Other CALL,MACRO,GEOALG: Consistency of parameters,args Resolved April 11 1997
    97-38 March 6 1997 Dietmar May Object Workshops, Inc. Other CALIB,CALL,GEOALG: Consistency of quotes Resolved April 11 1997
    97-39 July 10 1997 Dietmar May Object Workshops, Inc. Other SCNPLN: Application of PCS Resolved April 1 1998
    97-40 July 22 1997 Dietmar May Object Workshops, Inc. Enhancement F(): Feature Nominal info per diff CS Resolved April 1 1998
    97-41 July 27 1997 Dietmar May Object Workshops, Inc. Enhancement TEXT/QUERY: Question on usage. Resolved April 12 1998
    97-42 July 31 1997 Dietmar May Object Workshops, Inc. Other DMEHW: Question on usage. Resolved April 1 1998
    97-43 August 11 1997 Thomas Kramer NIST Error Various: Spellings & typos Resolved April 1 1998
    97-44 August 11 1997 Thomas Kramer NIST Error Sect.2.1.1: Clarification in text Resolved April 1 1998
    97-45 August 11 1997 Thomas Kramer NIST Error Sect.2.2.5: Contradiction in text Resolved April 2 1998
    97-46 August 12 1997 Thomas Kramer NIST Enhancement Sect.2.2.6: Clarification in "space" char. Resolved April 1 1998
    97-47 August 12 1997 Thomas Kramer NIST Error Sect.3.1.1: Typo in code example Resolved August 20 1998
    97-48 August 12 1997 Thomas Kramer NIST Error Sect.3.7.2: Addition of code line Resolved April 1 1998
    97-49 August 12 1997 Thomas Kramer NIST Error Sect.3.10.5: Contradicts 3.10.3 Resolved August 20 1998
    97-50 August 12 1997 Thomas Kramer NIST Enhancement Sect.3.13: Clarification on CS of output data Resolved April 1 1998
    97-51 August 12 1997 Thomas Kramer NIST Error Sect.3.13.1: Misleading text Resolved April 1 1998
    97-52 August 12 1997 Thomas Kramer NIST Error POL: Clarification on use of polar coords Resolved April 1 1998
    97-53 August 13 1997 Thomas Kramer NIST Error TOL/CYLCTY: concentric vs co-axial Resolved April 1 1998
    97-54 August 13 1997 Thomas Kramer NIST Enhancement TOL/POS: Clarification Resolved April 1 1998
    97-55 August 13 1997 Thomas Kramer NIST Error TOL/POS: Obsolete text Resolved August 20 1998
    97-56 August 13 1997 Thomas Kramer NIST Enhancement DATSET: Reference to datums Resolved August 20 1998
    97-57 August 13 1997 Thomas Kramer NIST Enhancement DATSET: Origin clarification Resolved August 20 1998
    97-58 August 13 1997 Thomas Kramer NIST Enhancement DATSET: Direction clarification Resolved April 2 1998
    97-59 August 13 1997 Thomas Kramer NIST Enhancement DATSET: Principle axis wording Resolved April 1 1998
    97-60 August 13 1997 Thomas Kramer NIST Error FEAT/PLANE: Defining point of nominal vs.actual Resolved April 1 1998
    97-61 August 13 1997 Thomas Kramer NIST Error TRANS/XORIG: Clarification text Resolved June 28 1998
    97-62 August 14 1997 Thomas Kramer NIST Error THLDEF: Clarification of text Resolved June 28 1998
    97-63 August 14 1997 Thomas Kramer NIST Error FEDRAT: Ques. on n with DEFALT Resolved April 1 1998
    97-64 August 15 1997 Thomas Kramer NIST Error ROTAB: Clarification of text Resolved April 1 1998
    97-65 August 15 1997 Thomas Kramer NIST Enhancement ROTAB: Limits on value of n. Resolved April 1 1998
    97-66 August 15 1997 Thomas Kramer NIST Error CONST: Figures labeled incorrect Resolved August 20 1998
    97-67 August 15 1997 Thomas Kramer NIST Enhancement OBTAIN: Change values of a FA Resolved January 15 1999
    97-68 August 15 1997 Thomas Kramer NIST Error OUTPUT: Clarification of text Resolved June 28 1998
    97-69 August 15 1997 Thomas Kramer NIST Other OUTPUT: Clarification of text Resolved April 28 1998
    97-70 August 18 1997 Thomas Kramer NIST Other DATSET: Initial CS clarification Resolved August 20 1998
    97-71 August 18 1997 Thomas Kramer NIST Other DATSET: Primary axis clarification Resolved August 20 1998
    97-72 August 18 1997 Thomas Kramer NIST Other DATSET: Primary plane clarification Resolved August 20 1998
    97-73 August 18 1997 Thomas Kramer NIST Other DATSET: Spec. incomplete CS Resolved October 9 1998
    97-74 August 18 1997 Thomas Kramer NIST Other DATSET: Z-origin clarification Resolved September 23 1998
    97-75 August 18 1997 Thomas Kramer NIST Other DATSET: Tertiary clarification Resolved January 15 1999
    97-76 September 2 1997 Thomas Kramer NIST Enhancement TECOMP: Matrl co-efficent of expansion Resolved June 28 1998
    97-77 September 2 1997 Thomas Kramer NIST Enhancement GECOMP: On/Off mach. error comp. Resolved April 2 1998
    97-78 September 11 1997 Robert Ross Stewart Chrysler Other MACRO: Use with multiple carriages Resolved August 20 1998
    97-79 September 11 1997 Thomas Kramer NIST Error Variable Length: inconsistancy Resolved August 20 1998
    97-80 September 11 1997 Kevin Paradis Ford Motor Company Error CONST: Offset plane construction Resolved June 28 1998
    97-81 September 11 1997 Keith Morton LK Inc. Enhancement PROMPT: Ability to prompt operator Resolved April 2 1998
    97-82 March 7 1997 Robert Kidd Ford Motor Company Enhancement CharLimits: Remove label length limits Resolved August 20 1998
    97-83 September 11 1997 Kevin Paradis Ford Motor Company Enhancement Alignment: Complex Alignment Resolved April 2 1998
    97-84 March 16 1998 Kevin Paradis Ford Motor Company Enhancement REPORT: Report feat. Meas along a vector Resolved August 20 1998
    97-85 March 16 1998 Kevin Paradis Ford Motor Company Enhancement GCURVE,GSURF: Extract into bounded features Resolved June 28 1998
    97-86 October 26 1997 Dietmar May Object Workshops, Inc. Error DA,D: DA( ) .vs. D( ) Resolved August 20 1998
    97-87 November 13 1997 Dietmar May Object Workshops, Inc. Error GEOALG: Clarification of text Resolved August 20 1998
    97-88 November 11 1997 Sergio Pozzi DEA Brown & Sharpe Other ERROR: Error catching of meas & move Resolved August 24 1998
    97-89 November 11 1997 Sergio Pozzi DEA Brown & Sharpe Other CONST: Offset geometry Resolved April 1 1998
    97-90 November 11 1997 Sergio Pozzi DEA Brown & Sharpe Enhancement DECL: Need for adv. array data types. Resolved January 15 1999
    97-91 November 11 1997 Sergio Pozzi DEA Brown & Sharpe Enhancement CALL,MACRO: Introduce PROCEDURE Resolved March 8 1999
    97-92 November 11 1997 Sergio Pozzi DEA Brown & Sharpe Enhancement TEXT: Enhance TEXT/QUERY Resolved April 2 1998
    98-1 February 23 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement F(): As it relates to coor'd system Resolved June 28 1998
    98-2 February 24 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Other Sect.2.2.5: Double Variables Resolved August 20 1998
    98-3 February 24 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement SNSDEF/INDEX: Orient sensor normal to feat Resolved July 22 1999
    98-4 February 24 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement GECOMP: On/Off mach. error comp. Resolved April 1 1998
    98-5 February 24 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Other TECOMP: On/Off temp comp. Resolved April 1 1998
    98-6 March 4 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement REPORT: Need additional data outputed Resolved August 20 1998
    98-7 March 4 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement QIS for REPORT: Workpiece placement info Resolved August 21 1998
    98-8 March 4 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement QIS for REPORT: Comment Information Resolved August 21 1998
    98-9 March 4 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement QIS for REPORT: Alignment information Resolved August 21 1998
    98-10 March 4 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement QIS for REPORT: Manufacturing Line Info Resolved August 21 1998
    98-11 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Operation Step Info Resolved August 21 1998
    98-12 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Program Datum Info Resolved August 21 1998
    98-13 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Part Number Info Resolved August 21 1998
    98-14 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Part Group Info Resolved August 21 1998
    98-15 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Operator Info Resolved August 21 1998
    98-16 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Part Repeat Meas. Info Resolved August 21 1998
    98-17 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Mfg. Shift Measured Info Resolved August 21 1998
    98-18 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Part Model Name Info Resolved August 21 1998
    98-19 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Part Model Number Info Resolved August 21 1998
    98-20 July 3 1998 Klaus-Peter Niemann European DMIS User Group - EDUG Enhancement TEXT: Label with a type Resolved August 20 1998
    98-21 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL: Orient. tols need 2 datum option Resolved April 14 1999
    98-22 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL/CONCEN: Additonal datum support Resolved August 20 1998
    98-23 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL/SYM: Additonal datum support Resolved August 20 1998
    98-24 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL/COMPOS: Additonal datum support Resolved April 2 1998
    98-25 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement GEOALG: Additional options for PARPLN Resolved April 2 1998
    98-26 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL: Orient tols need // tolzone option Resolved April 14 1999
    98-27 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL: Max. Allowed bonus tol. Resolved January 14 1999
    98-28 March 30 1998 Keith Morton LK, Inc. Enhancement FEAT/POINT: Need point on an edge. Resolved January 15 1999
    98-29 April 1 1998 Gordon Hogg Chrysler Corporation Error TOL/POS: RADIUS .vs. RADIAL Resolved August 20 1998
    98-30 April 6 1998 Gordon Hogg Chrysler Corporation Enhancement DISPLY: Need to turn OFF output Resolved August 20 1998
    98-31 June 28 1998 Henri Bosch IMS Error ACLRAT: Add default and fix 'n' Resolved August 20 1998
    98-32 July 13 1998 Denny He IMS Error Variable array indexing Resolved August 20 1998
    98-33 July 13 1998 Denny He IMS Enhancement base index of array variable Resolved August 20 1998
    98-34 July 17 1998 Eric Wightman Boeing ISDS Enhancement Allow negative tilt angle for SNSDEF Resolved August 20 1998
    98-35 July 17 1998 Henri Bosch International Metrology Systems Inc. Enhancement Ability to MIRROR an aligment's axis Resolved August 20 1998
    98-36 July 31 1998 Gary Akers AlliedSignal FM&T Error OPEN - example error Resolved August 20 1998
    98-37 August 3 1998 Dietmar May Object Workshops Enhancement PROMPT Resolved January 15 1999
    98-38 August 4 1998 Eric Hayes LK, Inc. Enhancement Report Angle Between a Feature and Axis Resolved August 24 1998
    98-39 August 6 1998 Curtis Brown AlliedSignal Inc. Enhancement TOL/FLAT TOL/STRGHT need for "by unit basis" Resolved August 24 1998
    98-40 August 21 1998 Denny He IMS Enhancement OBTAIN number of points Resolved November 10 1999
    98-41 August 21 1998 Denny He IMS Enhancement ERROR Resolved March 8 1999
    98-42 August 23 1998 Gordon Hogg Chrysler Corp. Error Inconsistent language in standard Resolved September 23 1998
    98-43 August 23 1998 Gordon Hogg Chrysler Corp. Error Inconsistent language in the satndard Resolved September 23 1998
    98-44 September 1 1998 Robert Ross Stewart Chrysler Enhancement Tolerance the len of CPARLN features Resolved January 15 1999
    98-45 September 9 1998 Gordon Hogg Chrysler Corp. Error DEVICE devicename (poor definition) Resolved September 23 1998
    98-46 September 9 1998 Gordon Hogg Chrysler Corp. Error Definitions of label vs XX(label) Resolved September 23 1998
    98-47 September 9 1998 Gordon Hogg Chrysler Corp. Error DISPLY Note: is misleading Resolved January 15 1999
    98-48 September 9 1998 Gordon Hogg Chrysler Corp. Other ASCII chararacter set Resolved September 23 1998
    98-49 September 14 1998 Robert Ross Stewart Chrysler Other CALL/EXTERN parameters&options&definitions Resolved April 14 1999
    98-50 September 14 1998 Robert Ross Stewart Chrysler Other definition of routine in CALL Resolved April 14 1999
    98-51 September 14 1998 Robert Ross Stewart Chrysler Enhancement CALL/EXTERN,DME,'routine' & DMISMD Resolved March 3 1999
    98-52 September 15 1998 Alexandre TROPPI (EDUG) Dassault Systemes Enhancement Gravity center construction (EDUG validated) Resolved January 15 1999
    98-53 September 15 1998 Alexandre TROPPI (EDUG) Dassault Systemes Enhancement PTBUFF for user control on tip radius compensation (EDUG validated) Resolved April 15 1999
    98-54 September 15 1998 Alexandre TROPPI (EDUG) Dassault Systemes Enhancement Maximum Statement Length (EDUG validated) Resolved January 15 1999
    98-55 September 15 1998 Dietmar May Object Workshops Other OUTPUT date,temp Resolved September 23 1998
    98-56 September 15 1998 Dietmar May Object Workshops Enhancement Parameters for user types Resolved September 21 1999
    98-57 September 15 1998 Dietmar May Object Workshops Enhancement Bounding plane direction meaning Resolved September 21 1999
    98-58 September 15 1998 Dietmar May Object Workshops Error OUTPUT for FA/RAWDAT w/no points Resolved January 15 1999
    98-59 September 15 1998 Dietmar May Object Workshops Error Output format for T() Resolved January 15 1999
    98-60 September 15 1998 Dietmar May Object Workshops Error UNITS specified in statement? Resolved January 15 1999
    98-61 September 15 1998 Dietmar May Object Workshops Error GEOALG only applies to BF CONST Resolved January 15 1999
    98-62 September 15 1998 Dietmar May Object Workshops Error Datums affected, features not? Resolved September 23 1998
    98-63 September 15 1998 Dietmar May Object Workshops Enhancement TRANS/PRBRAD not available w/multi-carriage Resolved March 8 1999
    98-64 September 15 1998 Dietmar May Object Workshops Error DATSET is overconstrained for orientation. Resolved January 15 1999
    98-65 September 15 1998 Dietmar May Object Workshops Enhancement Circular GOTO needed Resolved January 15 1999
    98-66 September 15 1998 Dietmar May Object Workshops Enhancement DATSET from matrix Resolved January 15 1999
    98-67 September 15 1998 Dietmar May Object Workshops Error ROTDEF w/cascaded tables Resolved January 15 1999
    98-68 September 15 1998 Dietmar May Object Workshops Error SCNPLN/FEAT meaning for some feats Resolved January 15 1999
    98-69 September 15 1998 Dietmar May Object Workshops Error DMEHW and RMEAS, CALIB Resolved January 15 1999
    98-70 September 15 1998 Dietmar May Object Workshops Enhancement CHAR as macro label Resolved January 15 1999
    98-71 September 15 1998 Dietmar May Object Workshops Other DISPLY not carriage specific Resolved April 15 1999
    98-72 September 15 1998 Dietmar May Object Workshops Enhancement CHAR character range Resolved January 15 1999
    98-73 September 15 1998 Dietmar May Object Workshops Enhancement Permit HLL statement within MEAS block Resolved March 8 1999
    98-74 September 15 1998 Dietmar May Object Workshops Enhancement Vector variables Resolved January 15 1999
    98-77 September 16 1998 Dietmar May Object Workshops Enhancement FA() definition/update Resolved January 15 1999
    98-78 September 16 1998 Dietmar May Object Workshops Enhancement Ability to use expressions within statements Resolved January 15 1999
    98-79 September 18 1998 Keith Morton LK Inc Enhancement Definition and calibration of star stylii Resolved July 22 1999
    98-80 September 18 1998 Keith Morton LK Inc Enhancement New feature FEAT/EDGE Resolved January 15 1999
    98-81 September 18 1998 Keith Morton LK Inc Enhancement CONST/POINT - Format 6 Resolved November 23 1999
    98-82 October 12 1998 Dietmar May Object Workshops Error FEAT/ARC ijk meaningless? Resolved April 14 1999
    98-83 October 18 1998 Keith Morton LK Inc Enhancement GOTO in Polar mode Resolved January 15 1999
    98-84 November 27 1998 Henri Bosch International Metrology Systems Enhancement FEAT/TORUS Resolved March 8 1999
    98-85 November 30 1998 Robert Ross Stewart DiamlerChrysler Error RMEAS/Format6 Resolved April 14 1999
    98-86 November 30 1998 Gordon Hogg DaimlerChrysler Enhancement There is no method of finding the current Rotary Table position or parameters. Resolved November 10 1999
    98-87 November 30 1998 Robert Ross Stewart DaimlerChrysler Other CONST/POINT (Input Format 4 & 6) Resolved November 24 1999
    98-88 November 30 1998 Gordon Hogg DiamlerChrysler Enhancement CRGDEF, Shouldn't we define all carriages? Resolved March 8 1999
    98-89 November 30 1998 Gordon Hogg DiamlerChrysler Error GECOMP Resolved March 8 1999
    98-90 November 30 1998 Gordon Hogg DiamlerChrysler Error REPORT/GECOMP... no description Resolved April 15 1999
    98-91 November 30 1998 Dietmar May Object Workshops Enhancement GEOALG,DME needs optional parameters. Resolved April 14 1999
    98-92 November 30 1998 Gordon Hogg DiamlerChrysler Other Characterization File example, no CRGDEF in the machine parameters. Resolved June 28 2001
    98-93 November 30 1998 Dietmar May Object Workshops Enhancement Interrupted measure support Resolved April 15 1999
    98-94 November 30 1998 Dietmar May Object Workshops Error TOL/USETOL needs INTOL-OUTOL flag Resolved January 15 1999
    98-95 November 30 1998 Dietmar May Object Workshops Other GOTARG meaning not well defined. Resolved January 15 1999
    98-96 November 30 1998 Dietmar May Object Workshops Error ALGDEF needs optional parameters. Resolved January 15 1999
    98-97 November 30 1998 Dietmar May Object Workshops Error Certain RMEAS feats can't be re-oriented Resolved April 14 1999
    98-98 November 30 1998 Dietmar May Object Workshops Error SNSDET/DEPTH,CLRSRF wording for tangent plane. Resolved January 15 1999
    98-99 November 30 1998 Dietmar May Object Workshops Error RMEAS(5) approach along axis for SPHERE invalid. Resolved March 9 1999
    98-100 November 30 1998 Dietmar May Object Workshops Error SCNPLN definition incorrect. Resolved January 15 1999
    98-101 November 30 1998 Dietmar May Object Workshops Error Alignment sensitive to point meas order. Resolved January 15 1999
    98-102 November 30 1998 Dietmar May Object Workshops Error QISDEF syntax incorrect. Resolved March 15 1999
    98-103 November 30 1998 Dietmar May Object Workshops Error Typo - OUTPUT example Resolved March 4 1999
    98-104 December 1 1998 Ron Schall Ford Motor Enhancement Lack of Gear Measurement Capability Validated February 9 2000
    98-105 December 1 1998 Bob Stone Origin International Enhancement Datum reference frames and CAD interaction Resolved July 23 1999
    98-106 December 1 1998 Kevin Paradis Ford Motor Company Enhancement Additional Probe Vector Resolved July 22 1999
    98-107 December 1 1998 Dietmar May Object Workshops, Inc. Other Output values of variable parameters Resolved March 9 1999
    98-108 December 2 1998 Gordon Hogg DiamlerChrysler Error Bad description in (DMIS statements) section Resolved March 8 1999
    98-109 December 2 1998 Gordon Hogg DiamlerChrysler Other Wrong wording in the text Resolved March 8 1999
    98-110 December 2 1998 Gordon Hogg DiamlerChrysler Other Wrong wording in the text Resolved April 14 1999
    98-111 December 2 1998 Gordon Hogg DiamlerChrysler Other Poor wording in the text Resolved April 14 1999
    98-112 December 2 1998 Gordon Hogg DiamlerChrysler Other wrong wording in the text Resolved April 14 1999
    98-113 December 2 1998 Gordon Hogg DiamlerChrysler Other example Characterization File Resolved June 28 2001
    98-114 December 2 1998 Gordon Hogg DiamlerChrysler Other Intrinsic Functions Resolved April 14 1999
    98-115 December 2 1998 Dietmar May Object Workshops, Inc. Other Can an actual exist without a nominal? Resolved March 8 1999
    98-116 December 2 1998 Dietmar May Object Workshops, Inc. Error Typo on CRGDEF. Resolved April 14 1999
    98-117 December 24 1998 Dietmar May Object Workshops Error Output file name ambiguous Resolved April 14 1999
    99-1 January 3 1999 Dietmar May Object Workshops, Inc. Error CALIB indeterminate or underparameterized for rotary tables Resolved April 15 1999
    99-2 January 2 1999 Dietmar May Object Workshops, Inc. Error Valid statements within CALIB not specified Resolved April 15 1999
    99-3 January 3 1999 Dietmar May Object Workshops, Inc. Enhancement Calculation of FEAT/PATERN features Resolved July 23 1999
    99-4 January 5 1999 Dietmar May Object Workshops, Inc. Other Limitations of CALIB/SENS,...,'text' Resolved July 22 1999
    99-5 January 6 1999 Rex W. Heagy Sheffield Measurement Enhancement The date and time of a sensor's calibration is not available. Resolved July 22 1999
    99-6 January 6 1999 Dietmar May Object Workshops, Inc. Other Valid MODEs for CLRSRF, DEPTH Resolved September 24 1999
    99-7 January 8 1999 Dietmar May Object Workshops, Inc. Error SNSDEF mis-parameterized w/o SNSMNT Resolved July 22 1999
    99-8 January 8 1999 Dietmar May Object Workshops, Inc. Enhancement SNSDEF Format1 inconsistent w/other formats Resolved July 22 1999
    99-9 January 10 1999 Dietmar May Object Workshops, Inc. Other OUTPUT DATE, TEMP for between evals Resolved April 15 1999
    99-10 January 14 1999 Cory Leland Deere and Company Enhancement Use of '.' in a Sensor Label Resolved March 8 1999
    99-11 January 15 1999 Rex W. Heagy Sheffield Measurement Error Thermal expansion coefficient Resolved April 15 1999
    99-12 January 16 1999 Henri Bosch International Metrology Systems Inc. Error DISPLY can no longer OUTPUT features/tolerances after 97-5 acceptance Resolved March 9 1999
    99-13 January 17 1999 Cory Leland D