Dimensional Measuring Interface Standard
Standard Improvement Requests


  • Submit SIR
  • Standards Home

    • DMIS Standard Improvement Requests
    The official SIR Reference Log for all submitted SIRs is given below. Not all SIRs have been resolved; however, whatever information is available concerning the status of all SIRs and their final resolutions will be posted at this location.

    To submit an SIR, first fill out the Standard Improvement Request form.

    The text for each SIR may be accessed by selecting its SIR number in the table below. Be sure to take advantage of the extensive search capabilities which can provide you information on other SIRs related to the topic of your concern, to find SIRs that deal with a given topic, or to locate specific SIRs by submitter (contact), company, problem type, etc.

    Currently showing 621 SIRs

    Note: You can sort the following table on any column by clicking on the column heading.

    SIR No. Submit Date Submitted By Company Problem Type Topic Status Status Date
    6-43 December 5 2006 Albert Soles Timken Co. Enhancement Helical Scanning Conical Surface Resolved March 7 2007
    98-52 September 15 1998 Alexandre TROPPI (EDUG) Dassault Systemes Enhancement Gravity center construction (EDUG validated) Resolved January 15 1999
    98-53 September 15 1998 Alexandre TROPPI (EDUG) Dassault Systemes Enhancement PTBUFF for user control on tip radius compensation (EDUG validated) Resolved April 15 1999
    98-54 September 15 1998 Alexandre TROPPI (EDUG) Dassault Systemes Enhancement Maximum Statement Length (EDUG validated) Resolved January 15 1999
    99-94 April 9 1999 Allan D. Spence McMaster University Other Clarify/Define Indirect Reference '@' Operator Resolved April 15 1999
    8-9 July 8 2008 Andrew Cheetham Metris Enhancement Multi-Axis Support Resolved October 22 2008
    7-12 October 22 2007 Bailey Squier BHSA Enhancement Definition of "Conformance" in DMIS Resolved November 1 2007
    98-105 December 1 1998 Bob Stone Origin International Enhancement Datum reference frames and CAD interaction Resolved July 23 1999
    5-2 December 1 2005 Bob Stone Origin International Inc. Error FEAT/GCURVE ijk vector definition is incorrect Resolved November 2 2006
    6-7 April 19 2006 Bob Stone Origin International Error DATDEF with datum targets (DATTRG) Resolved November 2 2006
    99-89 March 14 1999 Carl Hebner Boeing Other UNITS Resolved November 24 1999
    99-10 January 14 1999 Cory Leland Deere and Company Enhancement Use of '.' in a Sensor Label Resolved March 8 1999
    99-13 January 17 1999 Cory Leland Deere and Company Enhancement ACLRAT and FEDRAT Resolved March 8 1999
    99-96 April 14 1999 Cory Leland Deere and Company Enhancement Duplication of FA()'s Resolved April 16 1999
    99-99 July 16 1999 Cory Leland Deere and Company Enhancement LOCATE functional Enhancement Resolved July 21 1999
    99-105 August 26 1999 Cory Leland Deere and Company Enhancement VFORM does not support changing of report views Resolved November 24 1999
    99-106 August 26 1999 Cory Leland Deere and Company Enhancement No ability relate CAD CS to Part CS Resolved February 16 2000
    99-107 August 26 1999 Cory Leland Deere and Company Enhancement Working Parameters Resolved September 21 1999
    2-17 October 15 2002 Cory Leland Deere and Company Enhancement Relational and Logical Operators Resolved October 17 2002
    4-7 January 22 2004 Cory Leland Deere and Company Other STR() Output Format for Real Numbers Resolved January 22 2004
    4-50 April 30 2004 Cory Leland Deere & Company Error Removal of Scan -- Path -- Points Resolved November 1 2006
    8-16 October 15 2008 Cory Leland John Deere Error Applying a Tolerance to a Feature Validated October 15 2008
    8-17 October 15 2008 Cory Leland John Deere Enhancement Tolerance Coordinate System Access Resolved October 22 2008
    98-39 August 6 1998 Curtis Brown AlliedSignal Inc. Enhancement TOL/FLAT TOL/STRGHT need for "by unit basis" Resolved August 24 1998
    99-122 November 9 1999 Curtis Brown AlliedSignal Other Sensor Attributes missing CoordSys reference Resolved November 23 1999
    1-2 June 4 2001 Curtis Brown AP219/DNSC Harmonization Team Enhancement Extend PARPLN to accomodate any feature w/ symmetric pair of planes Resolved October 14 2003
    1-3 June 4 2001 Curtis Brown AP219/DNSC Harmonization Team Enhancement Point-Based boundaries for DMIS features. Resolved April 8 2004
    1-4 June 4 2001 Curtis Brown AP219/DNSC Harmonization Team Enhancement Addressing Datum Targets Resolved October 14 2003
    1-5 June 4 2001 Curtis Brown AP219/DNSC Harmonization Team Enhancement Designation of Feature Segments Resolved April 8 2004
    1-6 June 4 2001 Curtis Brown AP219/DNSC Harmonization Team Enhancement Incorporation of unique characteristics of ISO Tolerances Resolved April 8 2004
    1-7 June 4 2001 Curtis Brown AP219/DNSC Harmonization Team Other DMIS INTOL/OUTOL assessment unclear Resolved April 8 2004
    1-8 June 4 2001 Curtis Brown AP219/DNSC Harmonization Team Other Purpose of AVGDEV in TOL/PROFS is unclear. Resolved June 9 2003
    1-9 June 4 2001 Curtis Brown AP219/DNSC Harmonization Team Enhancement Origin designation for TOL/ANGLB and TOL/DISTB Resolved January 21 2004
    1-10 June 4 2001 Curtis Brown AP219/DNSC Harmonization Team Other Address ISO Limits and Fits Resolved April 8 2004
    1-11 June 4 2001 Curtis Brown AP219/DNSC Harmonization Team Enhancement Address Measurement Uncertainty Resolved April 8 2004
    7-11 March 7 2007 Curtis Brown DSC Error Various issues per DMIS 5.1 draft Resolved March 20 2007
    8-19 October 30 2008 Curtis Brown Honeywell FM&T Other Need Ability to Tag A Key Characteristic/Measurand Validated October 31 2008
    99-40 March 8 1999 Curtis W. Brown AlliedSignal Other Use of FILNAM file name for DISPLY STOR output. Resolved April 14 1999
    99-41 March 8 1999 Curtis W. Brown AlliedSignal Enhancement Need ability to docuement DMIS version in DMIS Resolved April 15 1999
    3-14 May 9 2003 Curtis W. Brown Honeywell, FM&T Enhancement Need for Surface of Revolution Feature Resolved October 15 2003
    3-15 May 9 2003 Curtis W. Brown Honeywell, FM&T Enhancement Constructing a compound features Resolved October 17 2003
    7-13 October 24 2007 Curtis W. Brown Honeywell FM&T Error PCS Definition is incorrect and needs to be expanded Resolved November 1 2007
    8-15 September 2 2008 Curtis W. Brown Honeywell FM&T Error Need to identify a DMIS program's Conformance Class Validated September 2 2008
    9-2 March 16 2009 Curtis W. Brown Honeywell FM&T Other DMIS Label Name Extension with Clarifications Validated March 16 2009
    9-5 April 8 2009 Curtis W. Brown Honeywell FM&T Error Tables in Annex F have errors and incomplete Validated April 8 2009
    9-6 April 8 2009 Curtis W. Brown Honeywell FM&T Error Need of an Open PARLN Feature Validated April 8 2009
    9-7 April 8 2009 Curtis W. Brown Honeywell FM&T Other Harmonaize with ASME Y14.5 - 2009 Validated April 8 2009
    2-13 October 9 2002 D R Admire Lockheed Martin Error TOL/COMPOS 2D & 3D clarification Resolved October 15 2002
    2-14 October 14 2002 D Ray Admire Lockheed Martin MFC- Dallas Enhancement DMIS does not support multiple patterns of features to the same FCF Resolved June 9 2003
    2-15 October 14 2002 D Ray Admire Lockheed Martin MFC- Dallas Error Error Clarification Resolved October 15 2002
    99-33 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Const point Resolved April 15 1999
    99-34 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Const Point Resolved April 15 1999
    99-35 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Constructions Resolved April 15 1999
    99-36 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Const Point Resolved September 21 1999
    99-37 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Const Point Resolved April 15 1999
    99-38 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Const Point Resolved November 23 1999
    99-39 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Best fit const Resolved April 15 1999
    99-42 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement New construction Resolved April 15 1999
    99-43 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Constructions Resolved April 15 1999
    99-44 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Construction Resolved April 15 1999
    99-45 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Constructions Resolved April 15 1999
    99-46 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Datums/PCS Resolved April 15 1999
    99-47 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Datums/PCS Resolved July 23 1999
    99-48 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Datums/PCS Resolved April 15 1999
    99-49 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Clearance Planes Resolved September 24 1999
    99-50 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Clearance Planes Resolved September 24 1999
    99-51 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Circular Moves Resolved November 24 1999
    99-52 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Measurements Resolved September 21 1999
    99-53 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Measurements Resolved November 24 1999
    99-54 March 8 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement High Point Measurements Resolved April 7 2004
    99-55 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement INPUT/OUTPUT Resolved April 15 1999
    99-56 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Graphical Display Resolved February 8 2000
    99-57 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Sensors Resolved April 15 1999
    99-58 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Tolerance Defn. Resolved April 15 1999
    99-59 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Tolerance Defn. Resolved September 21 1999
    99-60 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement INPUT/OUTPUT Resolved September 21 1999
    99-61 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Motion Resolved September 21 1999
    99-62 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Motions Resolved September 21 1999
    99-63 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement File and Machine Parameters Resolved October 16 2002
    99-64 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement File and Machine Params Resolved May 31 2002
    99-65 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Gap Resolved September 21 1999
    99-66 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Retrolinear Resolved September 21 1999
    99-67 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/ARC Resolved September 21 1999
    99-68 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/CIRCLE Resolved September 21 1999
    99-69 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/CPARLN Resolved September 21 1999
    99-70 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/CYLNDR Resolved September 21 1999
    99-71 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/ELLIPS Resolved April 15 1999
    99-72 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/NOTCH Resolved September 21 1999
    99-73 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/POINT Resolved April 15 1999
    99-74 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/SHPERE Resolved September 21 1999
    99-75 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Tolerances Resolved September 21 1999
    99-76 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Motions and Measurements Resolved November 23 1999
    99-77 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement File and Machine Params Referred April 5 2002
    99-78 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement File and Machine Params Resolved May 31 2002
    99-79 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Motions and Measurements Resolved November 24 1999
    99-80 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/CIRCLE Resolved September 22 1999
    99-81 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/ELLIPS Resolved September 21 1999
    99-82 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement FEAT/CPARLN Resolved September 21 1999
    99-83 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement TOL/HEIGHT Resolved September 21 1999
    99-84 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Machine Parameters Validated March 15 1999
    99-85 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement INPUT/OUTPUT Resolved September 21 1999
    99-86 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement INPUT/OUTPUT Resolved September 21 1999
    99-87 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Machine params Resolved November 24 1999
    99-88 March 9 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement Targets Resolved November 24 1999
    99-113 September 16 1999 Dave Petrizze Wilcox Associates, Inc. Enhancement OBTAIN: ease of use Resolved June 9 2003
    2-16 October 16 2002 Dave Petrizze Wilcox Associates, Inc. Other Test Resolved October 17 2002
    3-7 February 10 2003 Dave Petrizze Wilcox Associates, Inc. Other MAX needs clarification Resolved February 11 2003
    3-26 October 13 2003 Dave Petrizze Wilcox Associates, Inc. Other Alignments in Mulitple Carriage Systems Resolved October 15 2003
    3-37 October 17 2003 Dave Petrizze Wilcox Associates, Inc. Enhancement XTRACT needs modification Resolved April 8 2004
    3-38 October 23 2003 Dave Petrizze Wilcox Associates, Inc. Other Variable label names and use with @ Resolved January 20 2004
    98-32 July 13 1998 Denny He IMS Error Variable array indexing Resolved August 20 1998
    98-33 July 13 1998 Denny He IMS Enhancement base index of array variable Resolved August 20 1998
    98-40 August 21 1998 Denny He IMS Enhancement OBTAIN number of points Resolved November 10 1999
    98-41 August 21 1998 Denny He IMS Enhancement ERROR Resolved March 8 1999
    97-1 March 6 1997 Dietmar May Object Workshops, Inc. Other COMMON: Interpretation Resolved April 16 1997
    97-2 March 6 1997 Dietmar May Object Workshops, Inc. Other SENSOR: Interpretation of application Resolved August 20 1998
    97-3 June 3 1998 Dietmar May Object Workshops, Inc. Other ACLRAT: Implicit DME default?? Resolved April 11 1997
    97-4 March 6 1997 Dietmar May Object Workshops, Inc. Other FEDRAT: Default value ?? Resolved April 11 1997
    97-5 March 6 1997 Dietmar May Object Workshops, Inc. Other DISPLY: Interpretation Resolved September 11 1997
    97-6 March 6 1997 Dietmar May Object Workshops, Inc. Other DECL: Syntax ?? Resolved September 11 1997
    97-7 March 6 1997 Dietmar May Object Workshops, Inc. Other RAPID: Application of? Resolved April 11 1997
    97-8 March 6 1997 Dietmar May Object Workshops, Inc. Other VALUE: OUTOL for Composite Tolerances Resolved April 11 1997
    97-9 March 6 1997 Dietmar May Object Workshops, Inc. Other TOL/DISTB: Redundant Resolved April 11 1997
    97-10 March 6 1997 Dietmar May Object Workshops, Inc. Other SNSET: Allow mult. simul. sens. algs? Resolved August 20 1998
    97-11 March 6 1997 Dietmar May Object Workshops, Inc. Other MEAS: Diff from F() type? Resolved April 11 1997
    97-12 March 6 1997 Dietmar May Object Workshops, Inc. Other CLOSE/DID: What is default?? Resolved August 24 1998
    97-13 March 6 1997 Dietmar May Object Workshops, Inc. Other PTBUFF: Carriage specific? Resolved April 11 1997
    97-14 March 6 1997 Dietmar May Object Workshops, Inc. Other DMISMD: Scoping of valid statements Resolved September 11 1997
    97-15 March 6 1997 Dietmar May Object Workshops, Inc. Other FEAT/PTDATA: Coor'd type for point output Resolved August 20 1998
    97-16 March 6 1997 Dietmar May Object Workshops, Inc. Other CHR: Return type of CHR( ) Resolved September 11 1997
    97-17 March 6 1997 Dietmar May Object Workshops, Inc. Other ACLRAT,FEDRAT: Validity of RPMM,MPMM Resolved April 11 1997
    97-18 March 6 1997 Dietmar May Object Workshops, Inc. Other Are all variables declared? Resolved September 11 1997
    97-19 March 6 1997 Dietmar May Object Workshops, Inc. Other (label): Can it be a INTGR or REAL Resolved July 7 1998
    97-20 March 6 1997 Dietmar May Object Workshops, Inc. Other SNSDEF/LASER: Missing arguments for POL Resolved September 11 1997
    97-21 March 6 1997 Dietmar May Object Workshops, Inc. Other READ: From a printer is permitted? Resolved September 11 1997
    97-22 March 6 1997 Dietmar May Object Workshops, Inc. Other SENSOR/PROPE: Only sensor with a SA? Resolved July 22 1999
    97-23 March 6 1997 Dietmar May Object Workshops, Inc. Other EVAL/FA(label): As it applies to tolerance Resolved September 11 1997
    97-24 March 6 1997 Dietmar May Object Workshops, Inc. Other ELEMNT: Use of char? Resolved August 20 1998
    97-25 March 6 1997 Dietmar May Object Workshops, Inc. Other GOTARG: Statements allowed in block? Resolved April 11 1997
    97-26 March 6 1997 Dietmar May Object Workshops, Inc. Other POL: Scoping of coordinates? Resolved August 20 1998
    97-27 March 6 1997 Dietmar May Object Workshops, Inc. Other CRGDEF: Use of LITDEF,FILDEF,WINDEF? Resolved August 20 1998
    97-28 March 6 1997 Dietmar May Object Workshops, Inc. Other MACRO: Scoping of label, arguments? Resolved April 11 1997
    97-29 March 6 1997 Dietmar May Object Workshops, Inc. Other SNSET: Trailing specification? Resolved August 20 1998
    97-30 March 6 1997 Dietmar May Object Workshops, Inc. Other LITDEF: as applied to mulitple SNSLCT Resolved August 20 1998
    97-31 March 6 1997 Dietmar May Object Workshops, Inc. Other OUTPUT: When does it occur for xxx? Resolved August 20 1998
    97-32 March 6 1997 Dietmar May Object Workshops, Inc. Other RMEAS: What is diff of n vs. n1? Resolved August 20 1998
    97-33 March 6 1997 Dietmar May Object Workshops, Inc. Other RMEAS: Clarification in format 1 Resolved April 11 1997
    97-34 March 6 1997 Dietmar May Object Workshops, Inc. Other PROCID: Note clarification. Resolved April 11 1997
    97-35 March 6 1997 Dietmar May Object Workshops, Inc. Other SENS/PROBE: Clarification on use of ti,tj,tk" Resolved August 20 1998
    97-36 March 6 1997 Dietmar May Object Workshops, Inc. Other TOL/ANGL,COMPOS: Missing commas Resolved April 11 1997
    97-37 March 6 1997 Dietmar May Object Workshops, Inc. Other CALL,MACRO,GEOALG: Consistency of parameters,args Resolved April 11 1997
    97-38 March 6 1997 Dietmar May Object Workshops, Inc. Other CALIB,CALL,GEOALG: Consistency of quotes Resolved April 11 1997
    97-39 July 10 1997 Dietmar May Object Workshops, Inc. Other SCNPLN: Application of PCS Resolved April 1 1998
    97-40 July 22 1997 Dietmar May Object Workshops, Inc. Enhancement F(): Feature Nominal info per diff CS Resolved April 1 1998
    97-41 July 27 1997 Dietmar May Object Workshops, Inc. Enhancement TEXT/QUERY: Question on usage. Resolved April 12 1998
    97-42 July 31 1997 Dietmar May Object Workshops, Inc. Other DMEHW: Question on usage. Resolved April 1 1998
    97-86 October 26 1997 Dietmar May Object Workshops, Inc. Error DA,D: DA( ) .vs. D( ) Resolved August 20 1998
    97-87 November 13 1997 Dietmar May Object Workshops, Inc. Error GEOALG: Clarification of text Resolved August 20 1998
    98-37 August 3 1998 Dietmar May Object Workshops Enhancement PROMPT Resolved January 15 1999
    98-55 September 15 1998 Dietmar May Object Workshops Other OUTPUT date,temp Resolved September 23 1998
    98-56 September 15 1998 Dietmar May Object Workshops Enhancement Parameters for user types Resolved September 21 1999
    98-57 September 15 1998 Dietmar May Object Workshops Enhancement Bounding plane direction meaning Resolved September 21 1999
    98-58 September 15 1998 Dietmar May Object Workshops Error OUTPUT for FA/RAWDAT w/no points Resolved January 15 1999
    98-59 September 15 1998 Dietmar May Object Workshops Error Output format for T() Resolved January 15 1999
    98-60 September 15 1998 Dietmar May Object Workshops Error UNITS specified in statement? Resolved January 15 1999
    98-61 September 15 1998 Dietmar May Object Workshops Error GEOALG only applies to BF CONST Resolved January 15 1999
    98-62 September 15 1998 Dietmar May Object Workshops Error Datums affected, features not? Resolved September 23 1998
    98-63 September 15 1998 Dietmar May Object Workshops Enhancement TRANS/PRBRAD not available w/multi-carriage Resolved March 8 1999
    98-64 September 15 1998 Dietmar May Object Workshops Error DATSET is overconstrained for orientation. Resolved January 15 1999
    98-65 September 15 1998 Dietmar May Object Workshops Enhancement Circular GOTO needed Resolved January 15 1999
    98-66 September 15 1998 Dietmar May Object Workshops Enhancement DATSET from matrix Resolved January 15 1999
    98-67 September 15 1998 Dietmar May Object Workshops Error ROTDEF w/cascaded tables Resolved January 15 1999
    98-68 September 15 1998 Dietmar May Object Workshops Error SCNPLN/FEAT meaning for some feats Resolved January 15 1999
    98-69 September 15 1998 Dietmar May Object Workshops Error DMEHW and RMEAS, CALIB Resolved January 15 1999
    98-70 September 15 1998 Dietmar May Object Workshops Enhancement CHAR as macro label Resolved January 15 1999
    98-71 September 15 1998 Dietmar May Object Workshops Other DISPLY not carriage specific Resolved April 15 1999
    98-72 September 15 1998 Dietmar May Object Workshops Enhancement CHAR character range Resolved January 15 1999
    98-73 September 15 1998 Dietmar May Object Workshops Enhancement Permit HLL statement within MEAS block Resolved March 8 1999
    98-74 September 15 1998 Dietmar May Object Workshops Enhancement Vector variables Resolved January 15 1999
    98-77 September 16 1998 Dietmar May Object Workshops Enhancement FA() definition/update Resolved January 15 1999
    98-78 September 16 1998 Dietmar May Object Workshops Enhancement Ability to use expressions within statements Resolved January 15 1999
    98-82 October 12 1998 Dietmar May Object Workshops Error FEAT/ARC ijk meaningless? Resolved April 14 1999
    98-91 November 30 1998 Dietmar May Object Workshops Enhancement GEOALG,DME needs optional parameters. Resolved April 14 1999
    98-93 November 30 1998 Dietmar May Object Workshops Enhancement Interrupted measure support Resolved April 15 1999
    98-94 November 30 1998 Dietmar May Object Workshops Error TOL/USETOL needs INTOL-OUTOL flag Resolved January 15 1999
    98-95 November 30 1998 Dietmar May Object Workshops Other GOTARG meaning not well defined. Resolved January 15 1999
    98-96 November 30 1998 Dietmar May Object Workshops Error ALGDEF needs optional parameters. Resolved January 15 1999
    98-97 November 30 1998 Dietmar May Object Workshops Error Certain RMEAS feats can't be re-oriented Resolved April 14 1999
    98-98 November 30 1998 Dietmar May Object Workshops Error SNSDET/DEPTH,CLRSRF wording for tangent plane. Resolved January 15 1999
    98-99 November 30 1998 Dietmar May Object Workshops Error RMEAS(5) approach along axis for SPHERE invalid. Resolved March 9 1999
    98-100 November 30 1998 Dietmar May Object Workshops Error SCNPLN definition incorrect. Resolved January 15 1999
    98-101 November 30 1998 Dietmar May Object Workshops Error Alignment sensitive to point meas order. Resolved January 15 1999
    98-102 November 30 1998 Dietmar May Object Workshops Error QISDEF syntax incorrect. Resolved March 15 1999
    98-103 November 30 1998 Dietmar May Object Workshops Error Typo - OUTPUT example Resolved March 4 1999
    98-107 December 1 1998 Dietmar May Object Workshops, Inc. Other Output values of variable parameters Resolved March 9 1999
    98-115 December 2 1998 Dietmar May Object Workshops, Inc. Other Can an actual exist without a nominal? Resolved March 8 1999
    98-116 December 2 1998 Dietmar May Object Workshops, Inc. Error Typo on CRGDEF. Resolved April 14 1999
    98-117 December 24 1998 Dietmar May Object Workshops Error Output file name ambiguous Resolved April 14 1999
    99-1 January 3 1999 Dietmar May Object Workshops, Inc. Error CALIB indeterminate or underparameterized for rotary tables Resolved April 15 1999
    99-2 January 2 1999 Dietmar May Object Workshops, Inc. Error Valid statements within CALIB not specified Resolved April 15 1999
    99-3 January 3 1999 Dietmar May Object Workshops, Inc. Enhancement Calculation of FEAT/PATERN features Resolved July 23 1999
    99-4 January 5 1999 Dietmar May Object Workshops, Inc. Other Limitations of CALIB/SENS,...,'text' Resolved July 22 1999
    99-6 January 6 1999 Dietmar May Object Workshops, Inc. Other Valid MODEs for CLRSRF, DEPTH Resolved September 24 1999
    99-7 January 8 1999 Dietmar May Object Workshops, Inc. Error SNSDEF mis-parameterized w/o SNSMNT Resolved July 22 1999
    99-8 January 8 1999 Dietmar May Object Workshops, Inc. Enhancement SNSDEF Format1 inconsistent w/other formats Resolved July 22 1999
    99-9 January 10 1999 Dietmar May Object Workshops, Inc. Other OUTPUT DATE, TEMP for between evals Resolved April 15 1999
    99-25 February 6 1999 Dietmar May Object Workshops, Inc. Error CONST/PROJLI ambiguity Resolved April 15 1999
    99-27 February 7 1999 Dietmar May Object Workshops, Inc. Other Bounding of CONST input features Resolved April 15 1999
    99-28 February 11 1999 Dietmar May Object Workshops, Inc. Error OUTPUT/DAT Resolved April 15 1999
    99-29 February 11 1999 Dietmar May Object Workshops, Inc. Error OUTPUT DATE,TIME for BETWEEN Resolved April 15 1999
    99-90 March 15 1999 Dietmar May Object Workshops, Inc. Error Output format for TA Resolved April 15 1999
    99-91 March 15 1999 Dietmar May Object Workshops, Inc. Error RMEAS/GCURVE comp dir Resolved April 15 1999
    99-97 July 9 1999 Dietmar May Object Workshops, Inc. Error TOL/PROFS syntax disagrees with note, TOL/CPROFS Resolved November 22 1999
    99-98 July 9 1999 Dietmar May Object Workshops, Inc. Error OUTPUT TOL with DAT(x) Resolved November 23 1999
    99-102 August 10 1999 Dietmar May Object Workshops, Inc. Enhancement CONST/BF needs PRCOMP Resolved November 23 1999
    99-103 August 11 1999 Dietmar May Object Workshops, Inc. Error GEOALG - CPARLN,OB JECT need DEFALT Resolved September 21 1999
    99-128 January 5 2000 Dietmar May Object Workshops Error SAVE, RECALL broken with OPEN change Resolved February 8 2000
    0-3 February 1 2000 Dietmar May Object Workshops, Inc. Error FEAT/GEOM incorrect or inappropriate Resolved February 8 2000
    0-8 September 25 2000 Dietmar May Object Workshops Error SNSMNT has become ambiguous Resolved September 12 2001
    8-20 December 23 2008 Dietmar May Object Workshops Error CONST (format 14) undesirable behavior Validated December 23 2008
    98-21 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL: Orient. tols need 2 datum option Resolved April 14 1999
    98-22 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL/CONCEN: Additonal datum support Resolved August 20 1998
    98-23 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL/SYM: Additonal datum support Resolved August 20 1998
    98-24 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL/COMPOS: Additonal datum support Resolved April 2 1998
    98-25 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement GEOALG: Additional options for PARPLN Resolved April 2 1998
    98-26 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL: Orient tols need // tolzone option Resolved April 14 1999
    98-27 March 18 1998 Dr. Paul D. Thomas MTI Corporation Enhancement TOL: Max. Allowed bonus tol. Resolved January 14 1999
    98-38 August 4 1998 Eric Hayes LK, Inc. Enhancement Report Angle Between a Feature and Axis Resolved August 24 1998
    98-34 July 17 1998 Eric Wightman Boeing ISDS Enhancement Allow negative tilt angle for SNSDEF Resolved August 20 1998
    98-36 July 31 1998 Gary Akers AlliedSignal FM&T Error OPEN - example error Resolved August 20 1998
    0-4 February 9 2000 Gary Akers Honeywell FM&T Error Errors with DISPLY and FILNAM Resolved February 10 2000
    3-18 August 28 2003 Gary Akers Honeywell FM&T Enhancement STR() enhancement Resolved October 14 2003
    2-2 March 12 2002 Gary D Akers Honeywell FM&T Error PROMPT Resolved October 14 2002
    2-3 March 12 2002 Gary D Akers Honeywell FM&T Enhancement New intrinsic functions Resolved October 14 2002
    2-4 March 12 2002 Gary D Akers Honeywell FM&T Enhancement EVAL, OUTPUTand FEAT/CPARLN Resolved January 21 2004
    2-5 March 12 2002 Gary D Akers Honeywell FM&T Enhancement Temperature sensors Resolved October 16 2002
    3-13 April 25 2003 Gary D Akers Honeywell FM&T Enhancement CONST (input format 6) Resolved June 9 2003
    98-29 April 1 1998 Gordon Hogg Chrysler Corporation Error TOL/POS: RADIUS .vs. RADIAL Resolved August 20 1998
    98-30 April 6 1998 Gordon Hogg Chrysler Corporation Enhancement DISPLY: Need to turn OFF output Resolved August 20 1998
    98-42 August 23 1998 Gordon Hogg Chrysler Corp. Error Inconsistent language in standard Resolved September 23 1998
    98-43 August 23 1998 Gordon Hogg Chrysler Corp. Error Inconsistent language in the satndard Resolved September 23 1998
    98-45 September 9 1998 Gordon Hogg Chrysler Corp. Error DEVICE devicename (poor definition) Resolved September 23 1998
    98-46 September 9 1998 Gordon Hogg Chrysler Corp. Error Definitions of label vs XX(label) Resolved September 23 1998
    98-47 September 9 1998 Gordon Hogg Chrysler Corp. Error DISPLY Note: is misleading Resolved January 15 1999
    98-48 September 9 1998 Gordon Hogg Chrysler Corp. Other ASCII chararacter set Resolved September 23 1998
    98-86 November 30 1998 Gordon Hogg DaimlerChrysler Enhancement There is no method of finding the current Rotary Table position or parameters. Resolved November 10 1999
    98-88 November 30 1998 Gordon Hogg DiamlerChrysler Enhancement CRGDEF, Shouldn't we define all carriages? Resolved March 8 1999
    98-89 November 30 1998 Gordon Hogg DiamlerChrysler Error GECOMP Resolved March 8 1999
    98-90 November 30 1998 Gordon Hogg DiamlerChrysler Error REPORT/GECOMP... no description Resolved April 15 1999
    98-92 November 30 1998 Gordon Hogg DiamlerChrysler Other Characterization File example, no CRGDEF in the machine parameters. Resolved June 28 2001
    98-108 December 2 1998 Gordon Hogg DiamlerChrysler Error Bad description in (DMIS statements) section Resolved March 8 1999
    98-109 December 2 1998 Gordon Hogg DiamlerChrysler Other Wrong wording in the text Resolved March 8 1999
    98-110 December 2 1998 Gordon Hogg DiamlerChrysler Other Wrong wording in the text Resolved April 14 1999
    98-111 December 2 1998 Gordon Hogg DiamlerChrysler Other Poor wording in the text Resolved April 14 1999
    98-112 December 2 1998 Gordon Hogg DiamlerChrysler Other wrong wording in the text Resolved April 14 1999
    98-113 December 2 1998 Gordon Hogg DiamlerChrysler Other example Characterization File Resolved June 28 2001
    98-114 December 2 1998 Gordon Hogg DiamlerChrysler Other Intrinsic Functions Resolved April 14 1999
    99-17 January 26 1999 Gordon Hogg DaimlerChrysler Error MACRO nested IF Resolved April 15 1999
    99-18 January 26 1999 Gordon Hogg DaimlerChrysler Other SAVE, what is saved & when Resolved April 15 1999
    99-19 January 26 1999 Gordon Hogg DaimlerChrysler Other output of boundary information Resolved April 15 1999
    99-20 January 27 1999 Gordon Hogg DaimlerChrysler Other When is LOCATE output Resolved April 15 1999
    99-21 January 27 1999 Gordon Hogg DaimlerChrysler Other JUMPTO, format of the receiving label Resolved April 15 1999
    99-22 January 27 1999 Gordon Hogg DaimlerChrysler Other label We need more specific text Resolved April 15 1999
    99-26 February 7 1999 Gordon Hogg DaimlerChrysler Enhancement update FROM and GOTARG Resolved April 15 1999
    1-1 March 13 2001 Gordon Hogg DaimlerChrysler Error Duplicate & inaccurate information Resolved September 12 2001
    2-19 November 22 2002 Gordon Hogg DaimlerChrysler Other confusion / clarity Resolved February 13 2003
    3-2 January 27 2003 Gordon Hogg DaimlerChrysler Enhancement The subscirpt format [n,m] is not allowed with XTRACT Resolved February 13 2003
    3-3 January 27 2003 Gordon Hogg DaimlerChrysler Enhancement Scanning can not be explicitly controlled Resolved February 11 2003
    4-13 March 23 2004 Gordon Hogg DaimlerChrysler, Inc. Other EXTERN spawn / cont, whats the differance? Resolved April 6 2004
    4-14 March 23 2004 Gordon Hogg DaimlerChrysler, Inc. Other SNSMNT text is not correct. Resolved April 5 2004
    4-42 March 26 2004 Gordon Hogg DaimlerChrysler, Inc. Other Incomplete SIR resolution Resolved April 7 2004
    4-43 March 27 2004 Gordon Hogg DaimlerChrysler, Inc. Other Resolution to SIR 1-4 might be lacking. Resolved April 6 2004
    4-44 April 4 2004 Gordon Hogg DaimlerChrysler, Inc. Other Incomplete SIR resolution Resolved April 6 2004
    4-45 April 4 2004 Gordon Hogg DaimlerChrysler, Inc. Other Incomplete SIR resolution Resolved April 6 2004
    4-46 April 4 2004 Gordon Hogg DaimlerChrysler, Inc. Other Incomplete SIR resolution Resolved April 6 2004
    4-47 April 5 2004 Gordon Hogg DaimlerChrysler, Inc. Other Possible SIR resolution problem Resolved April 7 2004
    6-5 April 18 2006 Gordon Hogg DaimlerChrysler Error GEOALG has comma problems Resolved November 2 2006
    6-6 April 18 2006 Gordon Hogg DaimlerChrysler Error PAMEAS statement has a comma problem Resolved November 2 2006
    7-1 January 24 2007 Gordon Hogg DaimlerChrysler Error CONST (Input format 6) errors in normative text Resolved March 7 2007
    7-10 March 7 2007 Gordon Hogg DaimlerChrysler Error the implementation of EXPORT as the resolution to SIR 6-37 has major issues Resolved March 8 2007
    8-1 February 5 2008 Gordon Hogg Chrysler LLC Other Text not needed in the standard Resolved October 22 2008
    98-31 June 28 1998 Henri Bosch IMS Error ACLRAT: Add default and fix 'n' Resolved August 20 1998
    98-35 July 17 1998 Henri Bosch International Metrology Systems Inc. Enhancement Ability to MIRROR an aligment's axis Resolved August 20 1998
    98-84 November 27 1998 Henri Bosch International Metrology Systems Enhancement FEAT/TORUS Resolved March 8 1999
    99-12 January 16 1999 Henri Bosch International Metrology Systems Inc. Error DISPLY can no longer OUTPUT features/tolerances after 97-5 acceptance Resolved March 9 1999
    99-118 September 25 1999 Henri Bosch International Metrology Systems Inc. Other CLRSRF in PROG mode Resolved November 24 1999
    99-120 November 3 1999 Henri Bosch International Metrology Systems Inc. Other FEATURE NOMINAL AS THEY RELATE TO COORDINATE SYSTEMS Resolved February 8 2000
    1-23 October 4 2001 Henri Bosch International Metrology Systems Inc. Enhancement GOTO/INCR Resolved October 17 2002
    3-39 December 23 2003 Henri Bosch Xspect Solutions Inc. Error WRITE Statement as it relates to OPEN/DID Resolved January 20 2004
    8-10 July 9 2008 Henri Bosch Xspect Solutions Inc. Other Spaces in DMIS part programs before $$ and after $ Resolved October 22 2008
    9-1 February 4 2009 Henri Bosch Xspect Solutions Inc. Enhancement Projection of curve onto Plane Validated February 4 2009
    9-3 March 25 2009 Henri Bosch Xspect Solutions Inc. Enhancement No DMIS syntax for Gear Measurement Validated March 25 2009
    9-15 June 12 2009 Jeff Maze General Dynamics Marion OTS Enhancement Bounding a Plane w/a Circle Validated June 12 2009
    6-37 October 25 2006 Joe Schafer UGS Enhancement Add DML as an output option Resolved February 22 2007
    6-26 July 14 2006 John E. Peterson Metris-USA Other Program Mode interaction with Depth (possibly others) command Resolved November 2 2006
    6-38 October 30 2006 John E. Peterson Metris-USA Other Multiple usage of words/symbols Resolved November 2 2006
    99-126 November 15 1999 John J. McGee Metronics Error Transformation of Feature Nominals Resolved February 8 2000
    3-8 February 13 2003 John Mancos Delmia Corporation Error TOL/PERP and TOL/PARLEL need MAX tol option added when LMC exists Resolved June 9 2003
    99-125 November 14 1999 John McGee Metronics Error Transformed / untransformed nominals still problematic. Resolved February 8 2000
    9-4 March 31 2009 Keith Morton Renishaw Inc Enhancement Surface Finish Statements Validated March 31 2009
    97-81 September 11 1997 Keith Morton LK Inc. Enhancement PROMPT: Ability to prompt operator Resolved April 2 1998
    98-28 March 30 1998 Keith Morton LK, Inc. Enhancement FEAT/POINT: Need point on an edge. Resolved January 15 1999
    98-79 September 18 1998 Keith Morton LK Inc Enhancement Definition and calibration of star stylii Resolved July 22 1999
    98-80 September 18 1998 Keith Morton LK Inc Enhancement New feature FEAT/EDGE Resolved January 15 1999
    98-81 September 18 1998 Keith Morton LK Inc Enhancement CONST/POINT - Format 6 Resolved November 23 1999
    98-83 October 18 1998 Keith Morton LK Inc Enhancement GOTO in Polar mode Resolved January 15 1999
    99-23 January 28 1999 Keith Morton LK Inc Enhancement CONST requires at least one Feature Actual Resolved April 15 1999
    99-32 February 24 1999 Keith Morton LK Inc Enhancement GEOALG Resolved April 15 1999
    99-92 April 8 1999 Keith Morton LK Metrology Systems Inc Other DATSET Resolved July 22 1999
    99-108 September 7 1999 Keith Morton LK Metrology Systems Inc Enhancement TOL/COMPOS Resolved November 24 1999
    99-109 September 9 1999 Keith Morton LK Metrology Systems Inc Enhancement FEAT/ARC Resolved September 21 1999
    99-110 September 9 1999 Keith Morton LK Metrology Systems Inc Error CONST Format 11 Resolved November 23 1999
    0-2 January 17 2000 Keith Morton LK Metrology Systems Inc Other Update Nominals Resolved February 8 2000
    0-7 May 10 2000 Keith Morton LK Metrology Systems Inc Enhancement New Intrinsic function EXIST() Resolved October 14 2002
    1-14 June 6 2001 Keith Morton LK Metrology Systems Inc Error Output of tolerances with touch data Resolved September 12 2001
    1-15 June 7 2001 Keith Morton LK Metrology Systems Inc Other CONST/POINT,EXTREM Resolved September 13 2001
    1-16 June 7 2001 Keith Morton LK Metrology Systems Inc Enhancement CONST/feature,BF Resolved September 13 2001
    1-17 June 7 2001 Keith Morton LK Metrology Systems Inc Enhancement New instrinsic function for elapsed cycle time Resolved June 9 2003
    1-18 June 7 2001 Keith Morton LK Metrology Systems Inc Other REPORT and REPORT output Resolved October 15 2003
    1-19 June 7 2001 Keith Morton LK Metrology Systems Inc Enhancement GCURVE and GSURF nominal definition Resolved March 7 2002
    1-20 June 7 2001 Keith Morton LK Metrology Systems Inc Enhancement EVAL of a feature to a different GEOALG Resolved October 15 2003
    3-17 July 29 2003 Keith Morton LK Metrology Other Add table of applicable TOL statements for FEAT statements Resolved November 1 2006
    3-27 October 13 2003 Keith Morton LK Metrology Systems Inc Enhancement Single axis move with GOTO statement Resolved January 20 2004
    3-28 October 13 2003 Keith Morton LK Metrology Systems Inc Error Cannot construct a PARPLN feature Resolved October 14 2004
    3-29 October 13 2003 Keith Morton LK Metrology Systems Inc Enhancement Project sphere to plane to construct circle Resolved January 20 2004
    3-30 October 13 2003 Keith Morton LK Metrology Systems Inc Enhancement Construct circle from intersection of sphere and plane Resolved October 15 2003
    3-31 October 13 2003 Keith Morton LK Metrology Systems Inc Enhancement Output of 2D/3D angles with TOL/ANGLB Resolved January 20 2004
    3-32 October 14 2003 Keith Morton LK Metrology Systems Inc Error Convergence direction along vector defined in feature definition Resolved October 15 2003
    3-33 October 15 2003 Keith Morton LK Metrology Systems Inc Enhancement Add MAX word to PTBUFF syntax Resolved October 16 2003
    3-34 October 15 2003 Keith Morton LK Metrology Systems Inc Enhancement Construct POINT from XTRACT Resolved October 17 2003
    4-1 January 16 2004 Keith Morton LK Metrology Systems Inc Error Access to sensor calibration data Resolved January 20 2004
    4-48 April 6 2004 Keith Morton LK Metrology Systems Inc Enhancement Bound F(label) not applicable and restrictive Resolved April 8 2004
    4-49 April 6 2004 Keith Morton LK Metrology Systems Inc Enhancement Allow sensor and CMM move simultaneouslyu Resolved April 8 2004
    5-3 December 9 2005 Keith Morton LK Metrology Systems Inc Other TOL/ANGLB and TOL/ANGLWRT should have consistent capabilities Resolved November 2 2006
    7-3 March 5 2007 Keith Morton Metris USA Inc Enhancement Vector substitution in statement line Validated March 5 2007
    9-8 April 19 2009 Keith Morton Renishaw Inc Enhancement SNSET I++ harmonization Validated April 19 2009
    9-9 April 19 2009 Keith Morton Renishaw Inc Error Remove PTMEAS scanning method Validated April 19 2009
    9-10 April 19 2009 Keith Morton Renishaw Inc Enhancement PATH/HELIX for features other than Cylinder Validated April 19 2009
    9-11 April 19 2009 Keith Morton Renishaw Inc Other DATSET and TOL/POS - interoperability issue Validated April 19 2009
    9-12 April 20 2009 Keith Morton Renishaw Inc Other Modifications to Multi-axis statements Validated April 21 2009
    9-13 April 20 2009 Keith Morton Renishaw Inc Other SCNMOD Validated April 21 2009
    9-14 April 20 2009 Keith Morton Renishaw Inc Error Problem accessing raw scan data and actual data Validated April 21 2009
    10-1 January 29 2010 Keith Morton Renishaw Inc Enhancement TECOMP Validated January 31 2010
    97-80 September 11 1997 Kevin Paradis Ford Motor Company Error CONST: Offset plane construction Resolved June 28 1998
    97-83 September 11 1997 Kevin Paradis Ford Motor Company Enhancement Alignment: Complex Alignment Resolved April 2 1998
    97-84 March 16 1998 Kevin Paradis Ford Motor Company Enhancement REPORT: Report feat. Meas along a vector Resolved August 20 1998
    97-85 March 16 1998 Kevin Paradis Ford Motor Company Enhancement GCURVE,GSURF: Extract into bounded features Resolved June 28 1998
    98-106 December 1 1998 Kevin Paradis Ford Motor Company Enhancement Additional Probe Vector Resolved July 22 1999
    4-15 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-16 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-17 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-18 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-19 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Enhancement Standard Characterization File Resolved April 7 2004
    4-20 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Enhancement Standard Characterization File Resolved April 7 2004
    4-21 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-22 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-23 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-24 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-25 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Enhancement Standard Characterization File Resolved April 7 2004
    4-26 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-27 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-28 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-29 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-30 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-31 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-32 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-33 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-34 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-35 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-36 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-37 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-38 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    4-39 March 24 2004 Klaus Niemann / Jan Reimers Volkswagen AG Error Standard Characterization File Resolved April 7 2004
    98-1 February 23 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement F(): As it relates to coor'd system Resolved June 28 1998
    98-2 February 24 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Other Sect.2.2.5: Double Variables Resolved August 20 1998
    98-3 February 24 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement SNSDEF/INDEX: Orient sensor normal to feat Resolved July 22 1999
    98-4 February 24 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement GECOMP: On/Off mach. error comp. Resolved April 1 1998
    98-5 February 24 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Other TECOMP: On/Off temp comp. Resolved April 1 1998
    98-6 March 4 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement REPORT: Need additional data outputed Resolved August 20 1998
    98-7 March 4 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement QIS for REPORT: Workpiece placement info Resolved August 21 1998
    98-8 March 4 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement QIS for REPORT: Comment Information Resolved August 21 1998
    98-9 March 4 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement QIS for REPORT: Alignment information Resolved August 21 1998
    98-10 March 4 1998 Klaus-Peter Niemann European DMIS Users Group - EDUG Enhancement QIS for REPORT: Manufacturing Line Info Resolved August 21 1998
    98-11 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Operation Step Info Resolved August 21 1998
    98-12 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Program Datum Info Resolved August 21 1998
    98-13 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Part Number Info Resolved August 21 1998
    98-14 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Part Group Info Resolved August 21 1998
    98-15 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Operator Info Resolved August 21 1998
    98-16 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Part Repeat Meas. Info Resolved August 21 1998
    98-17 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Mfg. Shift Measured Info Resolved August 21 1998
    98-18 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Part Model Name Info Resolved August 21 1998
    98-19 March 4 1998 Klaus-Peter Niemann European DMIS Users Group -- EDUG Enhancement QIS for REPORT: Part Model Number Info Resolved August 21 1998
    98-20 July 3 1998 Klaus-Peter Niemann European DMIS User Group - EDUG Enhancement TEXT: Label with a type Resolved August 20 1998
    8-18 October 27 2008 Larry Maggiano Mitutoyo America Corp. Enhancement STEP AP238 Harmonization with DMIS Validated October 27 2008
    99-124 November 11 1999 Lutz Karras Carl Zeiss Error CAD function in DMIS Resolved February 8 2000
    0-5 February 9 2000 Lutz Karras Carl Zeiss Error SNSLCT problem with offset-wrists Resolved February 9 2000
    0-6 April 28 2000 Lutz Karras Carl Zeiss Enhancement Scanning with Linescanners Resolved April 8 2004
    2-18 October 28 2002 Lutz Karras Carl Zeiss Error OPEN statement Resolved February 13 2003
    3-9 April 23 2003 Lutz Karras Carl Zeiss Error CONST / PLANE...MIDPL not correct Resolved June 9 2003
    3-10 April 24 2003 Lutz Karras Carl Zeiss Enhancement One letter minor words cause errors Resolved June 9 2003
    3-19 September 1 2003 Lutz Karras Carl Zeiss Enhancement Scanning Resolved January 20 2004
    3-20 October 6 2003 Lutz Karras EDUG Other QISDEF Resolved October 14 2003
    3-21 October 8 2003 Lutz Karras EDUG Error Verbiage for MINMAX Resolved October 14 2003
    3-22 October 8 2003 Lutz Karras EDUG Error TOL/DISTB Resolved April 8 2004
    3-23 October 8 2003 Lutz Karras EDUG Error TOL/DIAM, use of MAJOR, MINOR Resolved October 14 2003
    3-24 October 8 2003 Lutz Karras EDUG Error Definition of tolerance zones Resolved January 20 2004
    3-25 October 8 2003 Lutz Karras EDUG Error Coaxiality, Concentricity Resolved October 14 2004
    4-3 January 20 2004 Lutz Karras Carl Zeiss Error Impossible to use SGAGE and SPART Validated January 20 2004
    4-9 February 17 2004 Lutz Karras Carl Zeiss Error TOL / COPMPOS Resolved April 7 2004
    4-10 March 22 2004 Lutz Karras EDUG Error TOL / STRGHT Resolved April 8 2004
    4-12 March 23 2004 Lutz Karras EDUG Error PROFL Resolved April 8 2004
    4-40 March 25 2004 Lutz Karras EDUG Error TOL / SYM Resolved April 8 2004
    4-41 March 25 2004 Lutz Karras EDUG Error BOUND Resolved April 7 2004
    5-1 July 27 2005 Lutz Karras EDUG Error Description of FEAT / LINE incomplete Resolved November 1 2006
    5-4 December 9 2005 Lutz Karris EDUG Other I++ DME does not allow sensor calibration Resolved March 6 2007
    5-5 December 9 2005 Lutz Karris EDUG Other CALL/EXTERN, DME not interoperable Validated December 9 2005
    5-6 December 9 2005 Lutz Karris EDUG Other CMPNTGRP should be removed Validated December 9 2005
    5-7 December 9 2005 Lutz Karris EDUG Other Use of CRGDEF need clarification Resolved March 6 2007
    5-8 December 9 2005 Lutz Karris EDUG Other CROSCL should be removed Validated December 9 2005
    5-9 December 9 2005 Lutz Karris EDUG Other DELETE inconsistant with I++ DME Validated December 9 2005
    5-10 December 9 2005 Lutz Karris EDUG Other EXTENS parameters need meaning Resolved March 6 2007
    5-11 December 9 2005 Lutz Karris EDUG Other Issues with EXTFIL / DME and SYS Validated December 9 2005
    5-12 December 9 2005 Lutz Karris EDUG Other FROM is a relic Validated December 9 2005
    5-13 December 9 2005 Lutz Karris EDUG Other Remove GECOMP Validated December 9 2005
    5-14 December 9 2005 Lutz Karris EDUG Other GOHOME amibiguous Resolved March 7 2007
    5-15 December 9 2005 Lutz Karris EDUG Other INCLUD/DME causes interoperability issues Validated December 9 2005
    5-16 December 9 2005 Lutz Karris EDUG Other OBTAIN allows questionable things Validated December 9 2005
    5-17 December 9 2005 Lutz Karris EDUG Other OUTPUT with S(lable) issue Validated December 9 2005
    5-18 December 9 2005 Lutz Karris EDUG Other PAMEAS with rotaty table is impossible Validated December 9 2005
    5-19 December 9 2005 Lutz Karris EDUG Other PATH USRDEF has interoperability issues Validated December 9 2005
    5-20 December 9 2005 Lutz Karris EDUG Other Question use of POP Validated December 9 2005
    5-21 December 9 2005 Lutz Karris EDUG Other Question use of PUSH Validated December 9 2005
    5-22 December 9 2005 Lutz Karris EDUG Other Question use selected uses of RECALL Validated December 9 2005
    5-23 December 9 2005 Lutz Karris EDUG Other Remove REFMNT Validated December 9 2005
    5-24 December 9 2005 Lutz Karris EDUG Other Question use of ROTAB with I++ DME Resolved March 7 2007
    5-25 December 9 2005 Lutz Karris EDUG Other Question use of SAVE Validated December 9 2005
    5-26 December 9 2005 Lutz Karris EDUG Other SCNSET needs clarification Validated December 9 2005
    5-27 December 9 2005 Lutz Karris EDUG Other SENSOR parameters need meaning Validated December 9 2005
    5-28 December 9 2005 Lutz Karris EDUG Other SNSDEF(1) to SNSDEF(6) parameters need meaning Validated December 9 2005
    5-29 December 9 2005 Lutz Karris EDUG Other SNSDEF(7) parameters need meaning Validated December 9 2005
    5-30 December 9 2005 Lutz Karris EDUG Other SNSET belongs to controller Validated December 9 2005
    5-31 December 9 2005 Lutz Karris EDUG Other ACLRAT is property of controller Validated December 9 2005
    5-32 December 9 2005 Lutz Karris EDUG Other FEDRAT is property of controller Validated December 9 2005
    5-33 December 9 2005 Lutz Karris EDUG Other Question use of SNSGRP Validated December 9 2005
    5-34 December 9 2005 Lutz Karris EDUG Other SNSLCT has issues Resolved March 7 2007
    5-35 December 9 2005 Lutz Karris EDUG Other SNSMNT parameters need meaning Resolved March 7 2007
    5-36 December 9 2005 Lutz Karris EDUG Other THLDEF parameters need meaning Resolved March 7 2007
    5-37 December 9 2005 Lutz Karris EDUG Other VALUE has unnecessary capabilities Validated December 9 2005
    5-38 December 9 2005 Lutz Karris EDUG Other WRIST has parameters that need meaning Resolved March 6 2007
    96-4 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement DMESW: Wait Period Resolved April 30 1997
    96-5 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement Cross c/l cyl. coord. sys. Resolved August 21 1998
    96-6 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement OUTPUT: Decimal places on output Resolved August 21 1998
    96-7 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement TOL/DIAM: Min/max value Resolved August 21 1998
    96-8 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement TOL/DISTB: Min/max value Resolved August 24 1998
    96-9 November 4 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement TOL: Tolerance eval. algorithm Resolved August 19 1998
    96-10 November 11 1996 M.K. Holloway Lockheed Martin Energy Systems Enhancement CONST/POINT: Obtain extreme points Resolved August 21 1998
    99-115 September 22 1999 Mark Pilkington Rolls-Royce Allison Other Inadequate definition of ATAN2 function Resolved November 23 1999
    99-116 September 22 1999 Mark Pilkington Rolls-Royce Allison Other ATAN2 definition not consistent with common mathematical practice Resolved November 23 1999
    99-117 September 22 1999 Mark Pilkington Rolls-Royce Allison Enhancement MACRO parameter passing method Resolved March 22 2002
    3-11 April 24 2003 Michael Peter Mitutoyo America Corporation Error Examples use invalid label names Resolved June 9 2003
    3-12 April 25 2003 Michael Peter Mitutoyo America Corporation Enhancement Reserved words are never defined Resolved June 9 2003
    3-35 October 16 2003 Michael Peter Mitutoyo America Corporation Error Function definition of VALUE incorrect Resolved January 20 2004
    3-36 October 16 2003 Michael Peter Mitutoyo America Corporation Error DECL references a non-existent "declaration part" of a DMIS program. Resolved January 20 2004
    4-2 January 20 2004 Michael Peter Mitutoyo America Corporation Error Iterative alignment example violates DMIS Resolved April 7 2004
    4-4 January 20 2004 Michael Peter Mitutoyo America Corporation Error orientation definition incomplete Resolved April 5 2004
    4-5 January 20 2004 Michael Peter Mitutoyo America Corporation Error The example in 5.1.9.1 violates the text that it illustrates Resolved January 22 2004
    4-6 January 20 2004 Michael Peter Mitutoyo America Corporation Error Text in 5.2.3.3 contradicts itself. Resolved January 22 2004
    4-8 January 22 2004 Michael Peter Mitutoyo America Corp Enhancement Add a function to construct a feature that is reduced from a reducible feature Resolved January 22 2004
    2-6 March 19 2002 Mike Roterdam Mitutoyo America Corporation Other Macro Parameters Passed By Value Or By Reference Resolved March 22 2002
    2-7 March 19 2002 Mike Roterdam Mitutoyo America Corporation Error GEOALG's BSPLIN Minor Word Signifies "bicubic spline" Resolved June 9 2003
    2-8 March 19 2002 Mike Roterdam Mitutoyo America Corporation Enhancement FEAT/PARPLN overdefined Resolved October 14 2004
    2-9 March 19 2002 Mike Roterdam Mitutoyo America Corporation Error Composite Profile Of A Curve Resolved June 9 2003
    2-10 March 20 2002 Mike Roterdam Mitutoyo America Corporation Enhancement Feature Control Frame Reconstruction Resolved October 15 2003
    2-11 March 20 2002 Mike Roterdam Mitutoyo America Corporation Enhancement Introduce At Random Number Generator Intrinsic Function Resolved June 9 2003
    96-1 May 20 1996 Pete Kocher SILMA Other FEDRAT: Use of ",n" not clear Resolved May 17 2005
    99-121 November 5 1999 Pete Kocher SILMA Division of Adept Other DATSET: ambiguous when using only 1 datum Resolved November 23 1999
    99-93 April 9 1999 Pozzi Sergio DEA Brown & Sharpe Enhancement Sphere measurement Resolved September 21 1999
    3-4 February 6 2003 Ray Admire Lockheed Martin MFC- Dallas Enhancement Output of tolerances with touch data Resolved April 7 2004
    3-5 February 6 2003 Ray Admire Lockheed Martin MFC- Dallas Enhancement Construction is limited on G-curve/G-Surf Resolved January 16 2004
    3-6 February 6 2003 Ray Admire Lockheed Martin MFC- Dallas Enhancement DMIS 4.0 does not support the construction of G-Surf or G-Curve Resolved February 13 2003
    99-5 January 6 1999 Rex W. Heagy Sheffield Measurement Enhancement The date and time of a sensor's calibration is not available. Resolved July 22 1999
    99-11 January 15 1999 Rex W. Heagy Sheffield Measurement Error Thermal expansion coefficient Resolved April 15 1999
    99-14 January 22 1999 Rex W. Heagy Sheffield Measurement Other Definition/Example of PCENT in FEDRAT Resolved April 15 1999
    99-15 January 22 1999 Rex W. Heagy Sheffield Measurement Other Definition/Example of SPEED in RAPID Resolved April 15 1999
    99-16 January 25 1999 Rex W. Heagy Sheffield Measurement Error OUTPUT Syntax Error on var_6 Resolved April 15 1999
    99-24 January 28 1999 Rex W. Heagy Sheffield Measurement Error CONST/POINT,F(label1),EXTREME... Resolved April 15 1999
    99-30 February 15 1999 Rex W. Heagy Sheffield Measurement Error Typo in documentation for CONST(Input Format 3) Resolved March 9 1999
    99-31 February 15 1999 Rex W. Heagy Sheffield Measurement Error ERROR. Typo(s) in var_1 description Resolved March 8 1999
    99-101 August 9 1999 Rex W. Heagy Sheffield Measurement Error WKPLAN Resolved September 21 1999
    99-111 September 16 1999 Rex W. Heagy Sheffield Measurement Other CONST (Input Format 6) Resolved November 23 1999
    99-112 September 16 1999 Rex W. Heagy Sheffield Measurement Error The ouptut format for PTDATA,RAWDAT now requires ip,jp,kp Resolved November 23 1999
    99-129 January 19 2000 Rex W. Heagy Sheffield Error TOL/POS with material condition modifiers Resolved February 9 2000
    0-1 January 10 2000 Rex W. Heagy Sheffield Error CONST/Point with INTOF Resolved February 9 2000
    2-1 March 1 2002 Rex W. Heagy Giddings & Lewis CMS Error First DA() output format was changed to D(). Resolved October 15 2002
    2-20 December 12 2002 Rex W. Heagy Sheffield Automation, LLC Error PROMPT only allows for one or two controls per statement. Resolved February 12 2003
    2-21 December 12 2002 Rex W. Heagy Sheffield Automation, LLC Error Standard Characterization File Resolved April 7 2004
    2-22 December 12 2002 Rex W. Heagy Sheffield Automation, LLC Error DMIS Characterization File (Input) Resolved April 7 2004
    3-1 January 9 2003 Rex W. Heagy Sheffield Automation, LLC Error DMIS EBNF doesn't support feature's individual point data Resolved April 7 2004
    6-8 June 8 2006 Rex W. Heagy Wilcox Associates, Inc Enhancement CONST (input format 6) Resolved November 1 2006
    6-39 November 1 2006 Rex W. Heagy Hexagon Metrology Enhancement Remove 80 character line limit Resolved November 2 2006
    6-42 November 27 2006 Rex W. Heagy Hexagon Metrology Enhancement Add TEXT/OPWAIT Validated November 27 2006
    7-9 March 6 2007 Rex W. Heagy Hexagon Metrology Enhancement Restructure var to remove DNE option from TOL/COMPOS, CPROFL, CPROFS, CRNOUT Resolved March 7 2007
    8-11 August 5 2008 Rex W. Heagy Hexagon Metrology Enhancement Asian customers are unanble to display comments in their native language Resolved October 22 2008
    96-2 November 3 1996 Richard B. Riker Software Quality Affair Consulting, Inc. Enhancement QIS: Statment Outputs Resolved September 30 1997
    96-3 November 3 1996 Richard B. Riker Software Quality Affair Consulting, Inc. Enhancement Sect.2.7: Remove 256 Character limit Resolved April 30 1997
    97-82 March 7 1997 Robert Kidd Ford Motor Company Enhancement CharLimits: Remove label length limits Resolved August 20 1998
    97-78 September 11 1997 Robert Ross Stewart Chrysler Other MACRO: Use with multiple carriages Resolved August 20 1998
    98-44 September 1 1998 Robert Ross Stewart Chrysler Enhancement Tolerance the len of CPARLN features Resolved January 15 1999
    98-49 September 14 1998 Robert Ross Stewart Chrysler Other CALL/EXTERN parameters&options&definitions Resolved April 14 1999
    98-50 September 14 1998 Robert Ross Stewart Chrysler Other definition of routine in CALL Resolved April 14 1999
    98-51 September 14 1998 Robert Ross Stewart Chrysler Enhancement CALL/EXTERN,DME,'routine' & DMISMD Resolved March 3 1999
    98-85 November 30 1998 Robert Ross Stewart DiamlerChrysler Error RMEAS/Format6 Resolved April 14 1999
    98-87 November 30 1998 Robert Ross Stewart DaimlerChrysler Other CONST/POINT (Input Format 4 & 6) Resolved November 24 1999
    99-100 July 22 1999 Robert Ross Stewart DaimlerChrysler Other Computation of dev and tolerances in CORTOL Resolved November 24 1999
    99-104 August 13 1999 Robert Ross Stewart DaimlerChrysler Other SNSET/CLRSRF - Operational mode and no standard way to disable it effect Resolved September 24 1999
    99-114 September 16 1999 Robert Ross Stewart DaimlerChrysler Enhancement XYZ Coordinates of Nominal Cylinders are not the measured values Resolved June 12 2001
    99-119 October 18 1999 Robert Ross Stewart DaimlerChrysler Error Comma problem in TOL/WIDTH Resolved November 23 1999
    99-130 January 24 2000 Robert Ross Stewart DaimlerChrysler Error PTBUFF "ERRORS and EHANCEMENTS" Resolved February 16 2000
    1-21 June 13 2001 Robert Ross Stewart DaimlerChrysler Enhancement Additions to the proposed&accepted SIR 0-7 Resolved October 15 2002
    1-22 August 17 2001 Robert Ross Stewart DaimlerChrysler Enhancement CONSTRUCT STATEMENTS DO NOT HAVE AN OUTPUT FORMAT SPECIFICATION Resolved October 17 2002
    3-16 May 13 2003 Robert Ross Stewart DaimlerChrylser Error Plane Nominal definition for vector direction Resolved June 9 2003
    6-40 November 7 2006 Roland Mayerhofer Wenzel Metromec AG Enhancement Remove all points of a scan Validated November 7 2006
    6-41 November 7 2006 Roland Mayerhofer Wenzel Metromec AG Enhancement SCNSET not allowed between MEAS...ENDMES Validated November 7 2006
    98-104 December 1 1998 Ron Schall Ford Motor Enhancement Lack of Gear Measurement Capability Validated February 9 2000
    99-95 April 14 1999 Ron Schall Ford Other Major & Minor word length Resolved April 15 1999
    99-123 November 10 1999 Ron Schall Ford Motor Co Enhancement Inabilty to inspect threaded features. Validated November 10 1999
    96-11 November 4 1996 Scott Underwood Lockheed Martin Energy Systems Enhancement Soft Funct. Gaging Resolved August 24 1998
    97-88 November 11 1997 Sergio Pozzi DEA Brown & Sharpe Other ERROR: Error catching of meas & move Resolved August 24 1998
    97-89 November 11 1997 Sergio Pozzi DEA Brown & Sharpe Other CONST: Offset geometry Resolved April 1 1998
    97-90 November 11 1997 Sergio Pozzi DEA Brown & Sharpe Enhancement DECL: Need for adv. array data types. Resolved January 15 1999
    97-91 November 11 1997 Sergio Pozzi DEA Brown & Sharpe Enhancement CALL,MACRO: Introduce PROCEDURE Resolved March 8 1999
    97-92 November 11 1997 Sergio Pozzi DEA Brown & Sharpe Enhancement TEXT: Enhance TEXT/QUERY Resolved April 2 1998
    99-127 December 10 1999 Sergio Pozzi COORD 3 SpA Error About feature nominal updating Resolved February 8 2000
    6-1 January 24 2006 Siva Chinnasamy Mitutoyo America Corporation Other Support for ALLSA with RECALL command Resolved November 2 2006
    6-2 April 17 2006 Siva Chinnasamy Mitutoyo America Corporation Enhancement CMM Scale Temperature Resolved November 2 2006
    6-3 January 27 2006 Siva Chinnasamy Mitutoyo America Corporation Enhancement PROMPT Validated January 29 2006
    6-4 April 17 2006 Siva Chinnasamy Mitutoyo America Corporation Enhancement Scanning Probes with Displacement Resolved November 2 2006
    10-3 September 1 2010 Steve Scigliano Siemens Error Typos in composite tolerance descriptions Validated September 4 2010
    97-43 August 11 1997 Thomas Kramer NIST Error Various: Spellings & typos Resolved April 1 1998
    97-44 August 11 1997 Thomas Kramer NIST Error Sect.2.1.1: Clarification in text Resolved April 1 1998
    97-45 August 11 1997 Thomas Kramer NIST Error Sect.2.2.5: Contradiction in text Resolved April 2 1998
    97-46 August 12 1997 Thomas Kramer NIST Enhancement Sect.2.2.6: Clarification in "space" char. Resolved April 1 1998
    97-47 August 12 1997 Thomas Kramer NIST Error Sect.3.1.1: Typo in code example Resolved August 20 1998
    97-48 August 12 1997 Thomas Kramer NIST Error Sect.3.7.2: Addition of code line Resolved April 1 1998
    97-49 August 12 1997 Thomas Kramer NIST Error Sect.3.10.5: Contradicts 3.10.3 Resolved August 20 1998
    97-50 August 12 1997 Thomas Kramer NIST Enhancement Sect.3.13: Clarification on CS of output data Resolved April 1 1998
    97-51 August 12 1997 Thomas Kramer NIST Error Sect.3.13.1: Misleading text Resolved April 1 1998
    97-52 August 12 1997 Thomas Kramer NIST Error POL: Clarification on use of polar coords Resolved April 1 1998
    97-53 August 13 1997 Thomas Kramer NIST Error TOL/CYLCTY: concentric vs co-axial Resolved April 1 1998
    97-54 August 13 1997 Thomas Kramer NIST Enhancement TOL/POS: Clarification Resolved April 1 1998
    97-55 August 13 1997 Thomas Kramer NIST Error TOL/POS: Obsolete text Resolved August 20 1998
    97-56 August 13 1997 Thomas Kramer NIST Enhancement DATSET: Reference to datums Resolved August 20 1998
    97-57 August 13 1997 Thomas Kramer NIST Enhancement DATSET: Origin clarification Resolved August 20 1998
    97-58 August 13 1997 Thomas Kramer NIST Enhancement DATSET: Direction clarification Resolved April 2 1998
    97-59 August 13 1997 Thomas Kramer NIST Enhancement DATSET: Principle axis wording Resolved April 1 1998
    97-60 August 13 1997 Thomas Kramer NIST Error FEAT/PLANE: Defining point of nominal vs.actual Resolved April 1 1998
    97-61 August 13 1997 Thomas Kramer NIST Error TRANS/XORIG: Clarification text Resolved June 28 1998
    97-62 August 14 1997 Thomas Kramer NIST Error THLDEF: Clarification of text Resolved June 28 1998
    97-63 August 14 1997 Thomas Kramer NIST Error FEDRAT: Ques. on n with DEFALT Resolved April 1 1998
    97-64 August 15 1997 Thomas Kramer NIST Error ROTAB: Clarification of text Resolved April 1 1998
    97-65 August 15 1997 Thomas Kramer NIST Enhancement ROTAB: Limits on value of n. Resolved April 1 1998
    97-66 August 15 1997 Thomas Kramer NIST Error CONST: Figures labeled incorrect Resolved August 20 1998
    97-67 August 15 1997 Thomas Kramer NIST Enhancement OBTAIN: Change values of a FA Resolved January 15 1999
    97-68 August 15 1997 Thomas Kramer NIST Error OUTPUT: Clarification of text Resolved June 28 1998
    97-69 August 15 1997 Thomas Kramer NIST Other OUTPUT: Clarification of text Resolved April 28 1998
    97-70 August 18 1997 Thomas Kramer NIST Other DATSET: Initial CS clarification Resolved August 20 1998
    97-71 August 18 1997 Thomas Kramer NIST Other DATSET: Primary axis clarification Resolved August 20 1998
    97-72 August 18 1997 Thomas Kramer NIST Other DATSET: Primary plane clarification Resolved August 20 1998
    97-73 August 18 1997 Thomas Kramer NIST Other DATSET: Spec. incomplete CS Resolved October 9 1998
    97-74 August 18 1997 Thomas Kramer NIST Other DATSET: Z-origin clarification Resolved September 23 1998
    97-75 August 18 1997 Thomas Kramer NIST Other DATSET: Tertiary clarification Resolved January 15 1999
    97-76 September 2 1997 Thomas Kramer NIST Enhancement TECOMP: Matrl co-efficent of expansion Resolved June 28 1998
    97-77 September 2 1997 Thomas Kramer NIST Enhancement GECOMP: On/Off mach. error comp. Resolved April 2 1998
    97-79 September 11 1997 Thomas Kramer NIST Error Variable Length: inconsistancy Resolved August 20 1998
    6-9 June 15 2006 Thomas Kramer NIST Error Errors in Appendix A examples Resolved November 2 2006
    6-11 July 3 2006 Thomas Kramer NIST Error two typos in 6.112, GOTO Resolved November 1 2006
    6-12 July 3 2006 Thomas Kramer NIST Error error in definition of 6.117 ITERAT Resolved November 1 2006
    6-13 July 5 2006 Thomas Kramer NIST Other precedence of comment vs line continuation is undefined Resolved November 1 2006
    6-14 July 5 2006 Thomas Kramer NIST Other Section 5.3.1 Operators needs improvement Resolved November 2 2006
    6-15 July 5 2006 Thomas Kramer NIST Error The description of IF needs improvement Resolved November 2 2006
    6-16 July 7 2006 Thomas Kramer NIST Error three intrinsic functions require too many arguments Resolved November 1 2006
    6-17 July 7 2006 Thomas Kramer NIST Error Description of SELAPSTIME does not mention var_6 Resolved November 1 2006
    6-18 July 7 2006 Thomas Kramer NIST Error typo (?) in string format for SDATETIME and SELAPSETIME Resolved November 1 2007
    6-19 July 11 2006 Thomas Kramer NIST Error errors in OPEN command Resolved November 1 2006
    6-20 July 11 2006 Thomas Kramer NIST Error PATH section out of alphabetical order Referred November 1 2006
    6-21 July 12 2006 Thomas Kramer NIST Enhancement parameters in PATH Validated July 13 2006
    6-22 July 12 2006 Thomas Kramer NIST Enhancement usage of POP ambiguous Validated July 13 2006
    6-23 July 12 2006 Thomas Kramer NIST Enhancement meaning of PROMPT/'text' is not documented Resolved November 1 2006
    6-24 July 13 2006 Thomas Kramer NIST Enhancement treatment of QIS needs improvement Resolved November 2 2006
    6-25 July 14 2006 Thomas Kramer NIST Enhancement meaning var_3 of REPORT not documented Resolved November 2 2006
    6-27 July 26 2006 Thomas Kramer NIST Error errors in TOL/COMPOS input format Resolved November 1 2006
    6-28 July 31 2006 Thomas Kramer NIST Error VALUE/ACLRAT does not make sense Resolved November 1 2006
    6-29 July 31 2006 Thomas Kramer NIST Error VALUE/FEDRAT does not make sense Resolved March 5 2007
    6-30 August 1 2006 Thomas Kramer NIST Enhancement P(label1) should be included in OBTAIN Validated August 1 2006
    6-31 August 2 2006 Thomas Kramer NIST Enhancement lotol and uptol for DMS angles Validated August 2 2006
    6-32 August 2 2006 Thomas Kramer NIST Enhancement documentation problems in VALUE Validated August 2 2006
    6-33 August 2 2006 Thomas Kramer NIST Error FEAT/OBJECT parsing is ambiguous Resolved November 1 2006
    6-34 August 2 2006 Thomas Kramer NIST Error two more problems with annex A examples Resolved November 2 2006
    6-35 August 3 2006 Thomas Kramer NIST Error passing labels in MACRO and CALL Resolved November 1 2006
    6-36 August 3 2006 Thomas Kramer NIST Enhancement operation of CALLed MACRO is ambiguous Validated August 3 2006
    7-2 February 19 2007 Thomas Kramer NIST Error errors in Excel spreadsheet defining conformance classes Validated February 19 2007
    7-4 March 5 2007 Thomas Kramer NIST Error SELAPSETIME needs fixing Resolved March 7 2007
    7-5 March 5 2007 Thomas Kramer NIST Enhancement description of PROMPT needs improvement Resolved March 7 2007
    7-6 March 5 2007 Thomas Kramer NIST Enhancement behavior when a comment line is continued is ambiguous Resolved March 7 2007
    7-7 March 5 2007 Thomas Kramer NIST Enhancement Without a limit on line length, DMIS will not be interoperable Resolved March 7 2007
    7-8 March 5 2007 Thomas Kramer NIST Enhancement Without a definition of the end-of-line symbol, DMIS will not be interoperable Resolved March 7 2007
    8-2 February 12 2008 Thomas Kramer NIST Error CONST (input format 5) Needs Clarification Resolved October 22 2008
    8-3 February 12 2008 Thomas Kramer NIST Other FEAT/ARC is Ambiguous Validated February 12 2008
    8-4 February 20 2008 Thomas Kramer NIST Error error in the PROMPT command Resolved October 22 2008
    8-5 February 20 2008 Thomas Kramer NIST Error It is not clear how QIS variables are intended to be used. Resolved October 22 2008
    8-6 February 20 2008 Thomas Kramer NIST Error The terms "label" and "label name" are not used consistently. Resolved October 22 2008
    8-7 April 5 2008 Thomas Kramer NIST Enhancement SIMREQT and ENDSIMREQT missing documentation and use unnecessary label Validated April 5 2008
    8-8 April 5 2008 Thomas Kramer NIST Error DR, DRA, U, and UA cannot be used with OUTPUT or OBTAIN Validated April 5 2008
    8-12 August 14 2008 Thomas Kramer NIST Enhancement allow white space before programming comments Resolved October 22 2008
    8-13 August 15 2008 Thomas Kramer NIST Enhancement allow white space after line a continuation character Resolved October 22 2008
    8-14 August 15 2008 Thomas Kramer NIST Enhancement documentation problems in SELECT Resolved October 22 2008
    1-12 June 5 2001 Todd Wackford Tecnomatix Enhancement Extend TOL/POS to include directed vector Resolved June 9 2003
    1-13 June 5 2001 Todd Wackford Tecnomatix Enhancement Extend TOL/CORTOL to include directed vector Resolved October 15 2003
    10-2 April 9 2010 Todd Wells Cotta Transmission Company Enhancement Limitation to Bound features by only a plane vs. features like cylinders Validated April 9 2010
    6-10 June 27 2006 Tom Kramer NIST Error CONST (input format 15) SPHERE Resolved November 3 2006
    4-51 December 16 2004 yjlee Freelancer Enhancement Need TOL/LEN statement Resolved November 1 2006